• 94,38

    This is our high performance foam! Despite the high concentration it dissolves in cold water and can be used in dosing systems or self service stations. Foaming is very high. We recommend to use 100-200 ml in 1L for foam guns. But even if you use only 50ml to 1L it will make a decent foam. It is safe on aluminium, nickel-plated surfaces and other coatings from non-ferrous alloys. This product is developed for car wash stations with high flow and it is our most cost efficient product due to concentration.

     

     

     

    Dilution

    Foam Generators or Sprayers 1:80 – 1:150

    Foam guns 100ml – 200ml in 1L

    Dosing Systems 1.0 – 2.0%

    How to use

    Spray the foam on the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.

     

     

     

    Composition

    Dye > 5%, perfume > 5%, EDTA > 5%, N-Surfactants > 5%, A-Surfactants 5-15%, phosphonates 5-15%, custic soda 5-15%, water < 30%.

     

     

     

     

     

    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.


  • 29,04

    This is our high performance foam! Despite the high concentration it dissolves in cold water and can be used in dosing systems or self service stations. Foaming is very high. We recommend to use 100-200 ml in 1L for foam guns. But even if you use only 50ml to 1L it will make a decent foam. It is safe on aluminium, nickel-plated surfaces and other coatings from non-ferrous alloys. This product is developed for car wash stations with high flow and it is our most cost efficient product due to concentration.

     

     

     

    Dilution

    Foam Generators or Sprayers 1:80 – 1:150

    Foam guns 100ml – 200ml in 1L

    Dosing Systems 1.0 – 2.0%

    How to use

    Spray the foam on the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.

     

     

     

    Composition

    Dye > 5%, perfume > 5%, EDTA > 5%, N-Surfactants > 5%, A-Surfactants 5-15%, phosphonates 5-15%, custic soda 5-15%, water < 30%.

     

     

     

     

     

    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.


  • 43,56

    That’s what we call a price killer.

    Simple product for a price that you can beat only with water.

    Foam is balanced, concentration is fair, it works well in summer conditions when there

    is no heavy dirt of course you can remove it as well but you will need more product.

    For winter conditions and heavy dirt we recommend to use Active Foam PP or Active Foam HP.

     

    Dilution

    Foam Generators or Sprayers 1:25 – 1:50

    Foam guns 350ml – 500ml in 1L

    How to use:

    Spray the foam on the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.

     

    Composition

    Fragrance > 5%, A-surfactant > 5%, N-surfactant > 5%, EDTA > 5%, phosphonates 5-15%, caustic soda 15-30%, water < 30%.


  • 65,34

    ACTIVE FOAM PP V2.0

    It is developed for use with hard and cold water.

    There is always a problem with water softness, some products just don’t work in hard water or don’t work as effectively as they should.

    Some use water softeners or complicated and expensive systems that makes water softer. So there was an obvious demand for a product that solves this issue.

    It wasn’t easy but we did it! We made a product that works in hard water and easily dissolves in cold.

    And even more, it can remove hard dirt even from trucks, it is highly foaming and in strong concentration, so it is cost efficient as well.

     

     

    Dilution

    Foam Generators or Sprayers 1:50 – 1:80

    Foam guns 200ml – 300ml in 1L

    Dosing Systems 2.0 – 3.5%

    How to use

    Spray the foam on the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.

     

     

    Composition

    Dye ≥ 5%, perfume ≥ 5%, EDTA ≥ 5%, N-Surfactants ≥ 5%, isopropyl alchocol ≥ 5%, A-Surfactants 5-15%, phosphonates 5-15%, custic soda 15-30%, water < 30%.

     

    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.


  • 43,56

    Detailing foam for a price of a regular foam. Since detailing become more popular there are more coated cars with ceramic, liquid glass or some kind of sealants. Regular car wash stations usually use aggressive cleansers and don’t buy expensive detailing products. What does a coated car need? If a car is coated that more likely means that owner follows up his car condition and heavy dirt is more like an exception. So you don’t need an aggressive cleanser. And if a car is coated that means that product should be free of wax or gloss enhancer as coating does this job better and wax or gloss enhancer just can decrease coatings efficiency. So here it is, Active Foam Safe dedicated detailing foam no wax, no gloss enhancer, no color that doesn’t cost you gazillion and does the job!
    Dilution
    Foam Generators or Sprayers 1:25 – 1:50
    Foam guns 100 – 200ml in 1L
    How to use
    Spray the foam to the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.
    Composition
    Perfume ≥ 5%, EDTA ≥ 5%, N-Surfactants ≥ 5%, A-Surfactants 5-15%, phosphonates 5-15%, custic soda ≥ 5%, water < 30%.
    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.

  • 19,25

    Detailing foam for a price of a regular foam. Since detailing become more popular there are more coated cars with ceramic, liquid glass or some kind of sealants. Regular car wash stations usually use aggressive cleansers and don’t buy expensive detailing products. What does a coated car need? If a car is coated that more likely means that owner follows up his car condition and heavy dirt is more like an exception. So you don’t need an aggressive cleanser. And if a car is coated that means that product should be free of wax or gloss enhancer as coating does this job better and wax or gloss enhancer just can decrease coatings efficiency. So here it is, Active Foam Safe dedicated detailing foam no wax, no gloss enhancer, no color that doesn’t cost you gazillion and does the job!
    Dilution
    Foam Generators or Sprayers 1:25 – 1:50
    Foam guns 100 – 200ml in 1L
    How to use
    Spray the foam to the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.
    Composition
    Perfume ≥ 5%, EDTA ≥ 5%, N-Surfactants ≥ 5%, A-Surfactants 5-15%, phosphonates 5-15%, custic soda ≥ 5%, water < 30%.
    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.
Navigation

My Cart

Close
Viewed

Recently Viewed

Close

Great to see you here !

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Already got an account?

Quickview

Close

Categories