Weight | 0.1 kg |
---|---|
Izmērs | 75 mm |
Zīmols | CarPro |
Flash Pad Cutting 75mm
€8,00
CarPro Flash Pad – For heavy cutting and spot repairs
A unique product specifically developed to meet the requirements of high performance buffing pads required by the automotive industry.
Made of 100% high quality reticulated polyurethane foam
100% Improved product life compare to other foam pads on the market.
Excellent abrasion and low hologram results : Time and cost saving.
Resulting of a wish to provide efficient fast polishing solution product to our customers, The Flash pad is a foam pad exclusively made of high quality reticulated high tech foam providing unique polishing results. In combination with our range of compounds, it provide you excellent 8 to 10 second spot repair results, with a significant reduction of holograms.
Specification :
Repair spot, over spray , birds dropping , Oxidized paint
RIDS marks and more, on the car body with no holograms thanks to its efficient association with Fixer polishing compound.
We offer these pad in 80mm, 130mm and 160mm sizes .
Application:
Use only with DA polisher or gear action (with light pressure) together with CarPro Fixer
Speed between 2-5 depending on machine being used.
Caution – These are very abrasive and should be used with care. Recommended for experienced users and paint thickness gauges should be used to measure removal rates.
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Removes deep scratches, acid rain or severe swirls/holograms.
• Fast cutting compound with advanced technology
• Quick removal of 1200 grit and finer sanding marks for easier polishing
• Works great on fresh & cured paints
3 Clay bars in one pack : Ultra Fine, Fine & Medium claysFine clay bar is a soft and very elastic, less sticky feeling in hands , 100g clay bar designed for light to medium claying and removal of everyday grime that builds up over time on your paint’s surface. These clay bars are designed for regular usage and maintenance without marking your paint’s surface and is perfectly safe for use with pH neutral lubricants and water as well .
White – Ultra Fine
Green – FineYellow – Medium
Use on any ‘hard’ surface: paint, glass, wheels and plastic trim. Each 100g clay has its own plastic pack , to keep it highly maintained and re-use it again without a risk of dirt attach.
With our CarPro USA Velvet and Denim Orange Peel Removal pads you can now remove or substantially reduce orange peel in the top layer without sanding. While removing orange peel and deep defects you are also polishing the paint rather than leaving sanding marks which reduces the steps needed afterwards.
New to Version 2:
– Foam Interlayer changed from 3/8″ to 3/16″
– Redesigned foam interlayer for more effective orange peel removal
– Redesigned without holes for longer durability
Keep ScratchX® 2.0 close at hand for quick removal of isolated paint scratches or blemishes … whenever they occur. Meguiar’s® exclusive micro-abrasive system enables ScratchX 2.0 to remove paint blemishes fast while restoring brilliant high gloss.
• Quickly removes fine scratches, swirl marks and fingernail marks.
• Clear coat safe.
CarPro Essence: EXTREME Gloss Primer 250ml
CarPro is turning the wheels of innovation once again!! CarPro Essence is a unique blend of nano-tech Quartz, high gloss durable resins, and fine abrasives that are blended together at a microscopic level to form something truly ground breaking! CarPro Essence leaves an amazing high gloss finish with semi-permanent fillers and protective capabilities all built in!
Paired with a microfiber cutting pad Essence is capable of unexpected cutting power, while a CarPro gloss pad armed with Essence provides gloss we could only dream of until now! But this is not simply a polish…
In less than the time you take to polish a car with conventional products, CarPro Essence is capable of removing swirls, building your clear coat thicker, leaving higher gloss, and laying down a semi-permanent coat of protection! Oh… and it wipes off like a dream!
Incredibly Essence also leaves a perfectly smooth, deep, reflective, primed layer to build on with CQuartz or Reload! The primer attribute in Essence makes application of CQuartz easier than ever and bonds together seamlessly, forming a shell of Extreme Gloss and protection!
Features:
Primes surface for CQuartz or Reload
Produces Extremely High Gloss
Semi-permanent filling capabilities
Adds layer of Sio2 Quartz protection
Use with D/A, Rotary, or by Hand
Prep:
Wash, decontaminate, and prep vehicle for polishing (Compound surface if heavily oxidized etc.)
Directions:
Shake well
For more cut use Microfiber cutting pad and prime well
For finicky and soft paints use microfiber pad
For maximum gloss use sparingly with CarPro Gloss pad
Spread evenly across section on low speed
Polish on medium speed
Clean pad often
Clean pads ands towels immediately after use
Precautions:
Do not ingest
Keep out of reach of children
CarPro automotive masking tape is the perfect tool to protect your trim or sensitive areas while polishing and are perfect for automotive paint masking as well. Before you polish mask the adjacent trim and make the most important step that much easier! Our masking tape provides excellent adhesion during use, yet pulls off clean with no residue when ready. It contours perfectly to curves and bodylines and is offered in 3 sizes (5, 15 and 24 mm).
Pulēšanas ripa vidējam solim paredzēta DA (orbitālajām) un rotācijas tipa pulēšanas mašīnām.
„TRAPEZ“ polishing pad (orange/medium) with inner hole and bachwarded Velcro.
For DA or Rotary polishers
Size: 165/25/150
Backing plate: 150mm
INTENSIVE POLISH & OIL REMOVER
An excellent all around cleaner, Eraser was specifically designed for the complete removal of polishing oils for inspection and prior to the application of CQuartz or any other coating, wax, or sealant. However due to the alcohol mixed with Eraser’s special degreasing agent we have found it also makes an excellent streak free glass cleaner and also works as a general purpose degreaser and cleaner for many situations. A final wipedown with Eraser on your tires will leave them cleaner than a tire wash and scrub alone.
Until now IPA (isopropyl alcohol) and water mixture, have been used to remove polish residue and fillers from auto paint before a wax or paint sealant are applied. This step allows you to check your work following compounding and it is supposed to ensure a totally clean paint surface on which the LSP (last step product) can bond. IPA loosens oil but the problem occurs as oil can be spread around or redeposited as you wipe the paint.
Eraser goes a step further with its intense cleaners that dissolve oils. Eraser breaks down polish residue as well as removing dust. It has the added bonus of cleaning better than an ordinary IPA, due to its patented degreasing formula. Eraser makes it possible for everyone to get the perfectly clean surface prior to the application of Cquartz or any other coating, wax, or sealant. Furthermore, with our proprietary blend you will not find even a hint of that nasty IPA smell when using Eraser.
INTRODUCING THE INCREDIBLE CARPRO GLOSS PAD… FOR EXTREME GLOSS!
- Extreme Gloss Pads for Intense Reflections!
- Super Soft open cell Japanese foam
- Dense Foam Urethane Interlayer
- Bevel profile
- High strength adhesive
Specifications:
- Fabricated in: Japan
- Assembled in: China
- Polishing Face Material: Open cell Polyurethane
- Polishing Face Diameter: 165
- Hook & Loop Diameter: 150
- Total thickness: 1 1/4″
- Color: White
- Polishing Foam: 3/4″ Thick (White)
- Dense Urethane Interlayer: 3/8″ Thick (Blue)
- Velcro Color: White
- Cut: 1/8 (Light)
- Finish: 8/8 (Glossy)
- Quantity: 1
- Fasten pad to machine taking care to securely center it on your backing plate
- Follow polish dependant tips
- Avoid overworking an area and do not hold pad still in one place
- When polishing, clean your pad after each section with your Foam Pad Brush before applying a couple more drops of polish for the next section.
INTRODUCING THE INCREDIBLE CARPRO GLOSS PAD… FOR EXTREME GLOSS!
- Extreme Gloss Pads for Intense Reflections!
- Super Soft open cell Japanese foam
- Dense Foam Urethane Interlayer
- Bevel profile
- High strength adhesive
Specifications:
- Fabricated in: Japan
- Assembled in: China
- Polishing Face Material: Open cell Polyurethane
- Polishing Face Diameter: 140mm
- Hook & Loop Diameter: 125mm
- Total thickness: 1 1/4″
- Color: White
- Polishing Foam: 3/4″ Thick (White)
- Dense Urethane Interlayer: 3/8″ Thick (Blue)
- Velcro Color: White
- Cut: 1/8 (Light)
- Finish: 8/8 (Glossy)
- Quantity: 1
- Fasten pad to machine taking care to securely center it on your backing plate
- Follow polish dependant tips
- Avoid overworking an area and do not hold pad still in one place
- When polishing, clean your pad after each section with your Foam Pad Brush before applying a couple more drops of polish for the next section.
Reviews
There are no reviews yet.