Ideal for cleaning glass, polish removal, interior and leather cleaning, wax buffing, general cleaning tasks and coating removal the cobra terry weave microfibre towels are high quality and soft 350gsm cloths with 70% polyester and 30% polyamide like our boa cloths don’t be fooled with cheaper 80/20 mix towels that could marr soft paintwork and gloss plastics.
Scratch free edgeless border (ultrasonic cut)
Size: 40 x 40
Wash and care instructions:
Wash seperate from other towels and polishing pads.
Hand wash with liquid soap or machine wash on a cotton setting at 40c with liquid soap that does not contain fabric softener this clogs microfibres.
DLUX Long Life Trim Coat was engineered specifically for coating plastics as well as rubber and metal. It can be used on any wheel finish including clear coated, chrome, aluminum, and plastic. This coating is the pinnacle of Exterior Plastic protection and darkens the trim as well without leaving any slick greasy feel that washes off.
Suitable as a plastic and metal protector for engine components.
(1) CQUARTZ DLUX 30ml.
(1) orange Foam Block Applicator
(4) 10x10cm Suede MF applicators
Made from quality high grade organic silane. DLUX is a Silane-based glass coating, DLUX Contains more than 50% pure silica!
Restores faded trim to look like new.
Lays down a protective film which forms an extremely durable glass coating on top of any substrate it is applied to.
We have incorporated a totally different nano composition to bond hard to plastic surface and achieve a thick uniformed layer.
Dlux offers a semi permanent chemical bonding to surface pores
Very easy to apply with great UV protection, on all exterior substrates.
Can be used on textured or smooth plastic
DLUX also offers semi permanent protection of aluminum wheels & Plastic finished wheels.
On wheels, DLUX will repel dirt and dust with ease & aid in the removal of brake dust.
DLUX will leave a glossy finish and is entirely hydrophobic.
Heat resistance to 800c+
Durability: 12+ months
Average use for 4 wheels and plastic trim = 10-15ml.
Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun.)
Scrub surface with an all purpose cleaner and or water spot remover, rinse clean, and allow to dry.
Use ERASER to remove any residue left by the APC or oil film and wait until the cleaned area is completely dry.
Wet the applicator with 5-6 drops of DLUX and spread evenly across the surface.
Let cure for 1 minute before buffing.
in the case of wheels, apply to full face then buff, then full rear barrel allow 1 minute cure then buff
Allow the surface to cure for 1-3 hours without any moisture on its surface.
Completely cured with NO rain requires 24 hours. (Any water marks from rain must be wiped off during first 24Hrs as a precaution)
Never allow highly alkaline (ph12+) chemicals such as non-diluted all purpose cleaners to sit or dwell on the surface for extended periods. This may damage the coating.
Do not use for other purposes.
If it becomes sticky and tough to remove apply more dlux over the top and buff immediately then work in smaller sections after this or omit the 1 minute cure.
Microfiber – polishing cloth is fantastich new polishing cloth for cars and for cleaning paintwork and car valeting and all types of polishing cleaning. Microfibre – polishing cloth the perfect tool for especially designed for the car industry, car-washes and auto body repair industry.
Laser cut removable label.
No risk of scratching maximum absorption.
Weight : 420 gr/m²
Composition : 70 % Polyester 30 % Polyamide
Size : 40 x 40 cm.
TREAT YOUR INTERIOR TO THE SAME LEVEL OF PROTECTION YOUR PAINT RECEIVES!
CQuartz Leather & Vinyl Coating is the ultimate in protection for both leather and vinyl surfaces throughout your vehicle! Our new high tech formula was created using only the highest quality ingredients available and offers a beautiful “better than new” finish with no added gloss! It was designed to provide an excellent combination of soft to the touch tactile feel, extreme protection, and unbelievable durability. CQuartz Leather & Vinyl was specifically developed to resist stains, dirt, jean dye transfer, and UV rays for years to come. Maintenance of your interior surfaces becomes as simple as wiping with a damp towel and walking away!
CQuartz Leather & Vinyl has been tested against a variety of chemicals and conditions including mud, grease, dye transfer, crayons, and even super glue and is proven to resist stains better than any traditional leather product. CQuartz Leather & Vinyl protects the existing materials with UV inhibitors integrated into the formula to provide the ultimate in UV protection as well. Protect your interior to the same degree you protect your paint with CQuartz Leather & Vinyl coating!
Features and Specifications:
Durability: 1 to 2 years
Resists dye transfer
Hydrophobic & Oil Phobic
“Easy clean” affect
Preserves color and resists fading
Traditional Finished Leather
Interior plastic and Wood
50ml per average vehicle
Professional Product – Not for do it yourself use
Avoid use on white/light colored interiors
Confirm any leather is standard finished leather only and if unsure perform 2 week visual test on inconspicuous surface
Note: Currently there are a variety of leather and vinyl materials with a variety of coatings used by many auto manufacturers. It is not possible to acquire or test this number of surfaces therefore user must confirm viability in inconspicuous area on any surface.
Thoroughly clean all dirt, moisture, and oils from surface with non-oily, interior safe cleaner that leaves no sealant or dressing
Wipe with a water damp towel to remove residue from your cleaner if needed
Pour at least 10 drops or one small strip onto the suede wrapped applicator
Work CQuartz Leather into the surface including all creases, and texture
Gently wipe off any excess within 2-3 minutes (may vary with temps and leather type)
May layer after 30 minutes from start of the first application
Touch dry after 10 min / Avoid water for 4 hours / Fully cured at 3 days
CeriGlass is a special glass polishing system developed by the innovative technique of blending special ceramics (which include Cerium Oxide) together with other nano components and mild abrasives. CeriGlass deep cleans and polishes all glass surfaces with ease. It quickly removes acid rain spots, hard water spots, road film, and stubborn bird stains. It is also capable of removing fine to medium windshield wiper scratches and swirls.
CeriGlass is so effective, it even removes fine to medium scratches. It leaves glass crystal clear and sparkling.
The additional Hand polishing pad can be used for the removal of mild water spots.
If you want to work efficiently on widespread severe water spots or light scratches use a combination of glass polishing machine (Rotary or DA) and use the CarPro glass polishing pad. (Purchased separately).
When used with machine this polish can remove surface scratching from glass which can be created by salt and road grime that binds to your windscreen wipers.
Will not distort glass.
Can also be used to clean and brighten chrome and other metal surfaces.
Not for use on aftermarket window tint, painted or coated glass.
Can in some instances remove tiny pinhole pits in glass windows, (dependant on depth).
150ml kit contains
1 x 150ml CeriGlass polish
1 x CarPro Cobra woven microfibre
1 x Rayon hand applicator block
How To Use:
Cover the vehicle surfaces around the glass with plastic
Apply small amount on the glass polish pad
Work thoroughly on the glass surface one section at a time in overlapping motions.
If the product starts to dry apply a spritz of water on the pad to extend the life of the polish (Important during the finishing stage for best finish)
Repeat as necessary
Rinse the surface with water, dry off with MF, and observe your work.
Do not dry wipe the dust or residue off of painted surfaces. Wash or clean with plenty of water.