SOFT99 ULTRA GLACO Glass Coating 70ml
SOFT99 Ultra Glaco is similar to most other high quality glass sealants in terms of the chemistry it employs and the performance benefits it offers, but it stands out from the crowd due to the design of the bottle it is supplied in. Rather than make you wet a flimsy applicator pad with product and rub it in, SOFT99 have made the process much easier by turning the bottle itself into a semi-rigid applicator pad. They have achieved this by shaping the bottle in such as way as to make it very comfortable to hold, and fitting the dispensing end with a large semi-rigid felt pad. By holding the pad against the glass and squeezing the bottle gently, you can wet the pad with product very easily and then work it in to the glass firmly without making your fingers tired and sore. It really is a very clever design and one that is so good it makes you wonder why it hasn’t been widely copied! Befitting its packaging, SOFT99 Ultra Glaco itself doesn’t disappoint either. The beading starts at around 35 mph and is round and tight, and each application will last for between six to twelve months before needing to be reapplied.
SOFT99 Ultra Glaco should be applied in a warm, dry, well-ventilated space out of direct sunlight. To protect your skin, we recommend wearing PB Nitrile Gloves during the application process. To achieve the quoted durability and performance benefits, it is necessary to properly clean the surfaces to be treated in advance. To do this, use Auto Finesse Vision to initially cut away any stubbornly bonded surface contaminants, and then use SOFT99 Silicone Off to remove any lingering grease and grime (put simply, the cleaner the glass is before the sealant is applied, the longer it will last). To apply the sealant, shake the bottle vigorously first to ensure that the contents are fully mixed. Next, unscrew the storage cap, place the felt pad against the glass and lightly squeeze the bottle a few times to wet the pad with product. Then work the product in to the glass in a circular fashion, using firm pressure. The resulting film should then be left to dry for 5-10 minutes before being buffed off with a PB Utility Towel. If you find the residue difficult to remove, apply a little more product and buff it off immediately (this should remove the residue).