Weight | 1.0 kg |
---|---|
Zīmols | CarPro |
Finest Reserve (Only For Accredited Detailers)
€999,00
Only CarPro Authorised Finest Installers
CQuartz Finest Reserve
CQuartz Finest Reserve is an entirely new technology developed to carry the torch for the ultimate development of the CarPro line of advanced nanotechnology coatings! Backed by a 3-Year CarPro Certified Warranty, CQuartz Finest Reserve is an extremely complex hybrid blend of sio2 infused epoxy nano particles.
This Next-Gen technology utilizes an advanced hybrid nano structural composition, which bridges the gap between ceramic and organic materials creating an extremely high gloss, dense nano-coat! Additionally this results in an extremely durable, thick coating with advances in a variety of attributes and unlike anything that has come before it. With our advanced “sio2poxi” tech, the new Finest Reserve is extremely resistant to water spots, acids, solvents, ice, oils, dirt, UV, and all manner of environmental attacks!
CarPro has once again paved the way for paint protection of the future with incredible repellency to anything the environment may toss at it and an industry best sliding angle of only 10 deg! From all field tests, we believe our latest tech is truly the best protection any automotive surface can achieve!
Features:
High Gloss
Super durable coat
Very low water spotting
Fast flashing / Fast curing
3~13pH resistant
High density / Anti abrasion
High hydrophobic –110° , low sliding angle – 10°
Apply to any surface except windscreen.
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
EASY TO USE: Just spray on, rinse off & dry! It’s that easy!
LESS EFFORT & MESS: No rubbing, curing, buffing or mess
HYBRID CERAMIC WAX PROTECTION: Advanced SiO2 hybrid technology delivers ceramic wax protection
MORE THAN A WAX: Protection & durability beyond conventional wax
WATER BEADING PROTECTION: Ceramic wax protection with extreme water beading action
Do you want an easy to use car wax that with cutting-edge, sophisticated technology that delivers
the latest in protection? Meguiar’s® Hybrid Ceramic Wax is the answer. With all-new, advanced
Si02 hybrid technology you get ceramic protection that’s so easy to use, you can actually wax your
paint as you rinse off your car! After washing & rinsing off the soap, simply spray on Meguiar’s
Hybrid Ceramic Wax and then follow that with a second rinse with a strong stream of water.
This final rinse helps to spread and lay down the wax evenly for you. Dry your vehicle like you
would normally with a quality microfiber drying towel, like Meguiar’s® Microfiber Water Magnet™
Drying Towel. There’s no rubbing or buffing and there’s no curing time. You’re left with ceramic
protection and durability well beyond conventional wax and extreme water beading protection.
Conventional? No. Sensational? YES! It’s Ceramic made easy!
To celebrate the end of the decade and ten years of Cquartz, we are proud to introduce the next evolution. After intense research, development, and testing, CQuartz SiC is ready to continue where Tio2 left off! As the name would suggest, this new formula also includes SiC (Silicon Carbide) for additional resistance against chemicals! Not only that but CQuartz SiC greatly improves the ease of use, resistance to water (mineral) spots, and even amped up the gloss! Finally, the slickness will leave you thrilled with the finished product!
Buy yours today and experience the new CQuartz SiC!
Ultra Smooth Hydrophobic Coating
Make your own bliss… Slide through gloss into GLISS!
If I were to ask you what two factors fill every true car care enthusiast with happiness, what would you say? For most it is the gloss and incredible feeling of a perfectly slick and pure finish! THAT is the essence of GLISS…
With GLISS, CarPro brought new advances in nanotechnology to bear and designed an all-new hyper-smooth, hyper-glossy and easy to apply ceramic nano coating that excels as a top-coat for all CQuartz coatings! CarPro GLISS also increases resistance to static buildup, dust retention and many types of mineral and water stains!
Combining modified long-chain carbon fluorine polymers and enhanced nano-technology, GLISS is an evolution in top-coat protection and its immensely tactile feel, achievable on any non porous surface!
This incredible next-gen coating serves multiple purposes and even excels as a stand-alone paint protection and enhancement system with a HYPER slick surface that will make your jaw drop!
Kit Includes:
(1) 50ml bottle of CQuartz GLISS (20ml+/- per coat)
(1) Applicator Block
(4) 4″ Microfiber Suede Applicators
Features:
Hyper SLICK and smooth
Next Generation Top Coat!
Also works great as a stand-alone Nano-coat!
Anti-static: Non-oily / resists dust retention
Adds thickness to your existing coat when used as a top coat
Enhances resistance to water spots and mineral stains
Extreme Hydrophobic affect
Enhances Gloss and life of any ceramic coating
Specifications:
Durability: 12+ Months
Coverage: 20ml per coat +/-
Water contact angle: 115°
Recommended working temperatures: 5c – 30c
Directions: (For use as primary coat)
Wash with Reset, decontaminate, and polish with a CarPro abrasive polish
Wipe down with CarPro Eraser (vehicle must be 100% dry and free of moisture or dew.)
Drag two lines of product across length of suede wrapped applicator.
Apply evenly across surface, approximately 2 ft x 2 ft section at a time.
Add more product to applicator as needed to keep a wet, even application.
GLISS will flash fast and when a white haze forms, immediately wipe off all residues using a microfiber towel. If haze is left on too long then reapply and immediately wipe off.
If layering on top of itself, wait 1 hour between coats. If IR cured may repeat immediately. Total cure time: 12 hours.
Directions: (For use as top coat)
May be applied 4 hours or longer after CQuartz.
If IR cured may be applied after 45 minutes from CQuartz application
After Tips:
Keep surface dry for at least one hour after application
Wipe any water off the surface during the first 24 hours after application
Avoid detergents and chemicals for 5-7 days after application
If it is dry and the air is clean outside then you may park the vehicle in direct sun after application is complete to hasten cure
To maintain wash regularly with CarPro Reset or Ech2o
Recommended Surfaces:
Paint
Metal
Plastic
And many other non-porous surfaces
Precautions:
Keep container tightly closed after use
Store in cool dry place
Keep away from children
Do not ingest
CQuartz Lite is the ultimate starter ceramic coating !, a user friendly, easily applied, “Lite” is based on the incredible CQuartz UK Ceramic Coating Technology, which has become famous around the world! CQuartz Lite can be applied as a stand-alone ceramic coating lasting more than 6 months or it can be used as a topcoat for existing CQuartz coatings!
CQuartz Lite was designed for those that aren’t ready to make the plunge into the industry leading strength of our professional strength coatings but wish to enjoy some of the many benefits that only CQuartz coatings offer. CQuartz Lite bridges the gap between the less effective traditional sealant technology and CQuartz Ceramic coatings that so many have come to love!
The capabilities of CQuartz Lite include: easier to clean surfaces, resistance to insect splatter, petrol spills, light solvents, Acids, Alkali in a PH 3-12 range and harmful UV rays, whilst providing a beading contact angle of 110 Deg! In other words, CQuartz Lite helps keep your paint super glossy, well protected, beads like crazy, and washes off easy when properly maintained!
CQuartz Lite is built on a combination of Sio2 and Tio2 particles with over 45% solid materials, as well as proprietary ingredients not made public outside of the lab! CQuartz Lite is a great option for professional detailers as an entry level coating or for the enthusiast who wants to try their first ceramic coating.
CQuartz Lite can be use on any exterior surface of your car including paintwork, plastics, wheels and glass (except windscreen), like your other favorite CQuartz products, CQuartz Lite is also matte safe!
If your curious about what ceramic coatings can do for you, CQuartz has you covered! From CQuartz Lite to CQuartz Professional grade coatings, we have a solution for every taste!
150ml CQ Lite
150ml Kit contents
150ml CQ Lite
2 x mf hand applicators
1 x Carpro ultra short loop microfibre cloth
1 x 3M face mask
1) Make sure the surface is clean and full decontaminated. Use CarPro Iron X, Tar X, and clay the surface to ensure all contamination is removed.
2) Use Carpro Eraser (or similar) to remove oils before application. Make sure surface is cool and dry. You may wish to polish the surface with Essence or Reflect to create higher gloss before using Eraser or to ensure maximum durability.
3) Apply 10-12 drops on a microfiber applicator; apply the product evenly to one small area of roughly 24×24” / 60cm x 60cm with complete coverage and an even layer,
4) Use a high quality microfiber to remove any excess. CQuartz Lite does not need to be left to cure on the surface so should be removed immediately. Check well with an appropriate light source to ensure you remove any high spots or residues.
Note: for a limited time after application, high spots that were not removed immediately can be corrected by applying more CQuartz Lite on that area and wiping off immediately.
5) After paint is free of residue, leave to dry for 4 hours prior to getting wet. Any water drops during first 48h should be removed before drying to prevent water spotting. We also recommend the use of Carpro Reload 1 hour after application to protect from water spots during first 48h
*please note* Microfibre applicator should be soaked in water/detergent (20 parts water 1 part detergent) mix and disposed off in a suitable waste container.
Recommended personal protection equipment:
Face mask and nitrile gloves suitable for protection from solvents while applying.
Cquartz Fabric Coat (500ml)
Cquartz Fabric protection is nano-technology based and is an extremely durable Super HydroPhobic product for fabric protecting against sweat, salt, water, liquids, dirt, bacteria, and stains. Fabric Coat does all this without affecting the breath-ability of the material. Traditional products make fabrics feel stiff and clog the weave of the fabric, preventing breath-ability. They are unable to stand up to tough cleaners and less resistant to wear. Using nanotechnology, our treatment is small enough to attach to individual fibers, delivering superior performance characteristics without compromising the look, feel, or comfort of the fabric and without clogging the fabric weave.
Cquartz Fabric transforms the substrate into a super hydrophobic surface that is both durable, flexible, and long lasting against harsh or caustic detergents.
Areas Of Application:
Convertible Tops
Seats
Upholstery
Carpets
Mats
And more…
Features:
Super Hydrophobic: Liquids are repelled instantly
Durability: Withstands mechanical wear for up to a year and withstands strong soaps and high pH intensive detergents
UV protection: Protects against UV degeneration while maintaining the supple feel and original color of treated surfaces
Breathability remains
Versatility: Protect many surfaces such as fabric upholstery, carpets, mats, & convertible fabric tops
Long lasting protection for textiles against water, dirt and grease
Appearance: Transparent
Revives dull faded interiors and protects them from further attack
Resists bacteria growth from sweat, dirt, oils, and liquids
Requires less cleaning: In most cases simply wipe with a wet microfiber towel
Other Details:
Coating Amount : 50ml treats approximately 12 Sq. Ft.
Apply using Sprayer, electric atomizer or by brushing
Directions:
Clean the surface completely from dirt, dust, and all oil using “Interior safe” Apc mix with no residues and dry completely
Shake CQ Fabric Coat well
Spray onto surface evenly.
Use heat gun to dry well or park in the sun
AfterCare:
Avoid using car shampoos containing wax or silicones or they will affect the super hydrophobic effect.
Precautions:
Test in inconspicuous area on any surface you are unsure of
Not suitable for Leather
Do not dilute
Use in ventilated area
Avoid Skin and eye contact
Keep Container closed after use
Keep away from Children
CarPro Essence PLUS 250ml
Non-abrasive Gloss Agent & Top Coat Jeweler
Imagination becomes reality… Introducing an incredible new tool for detailers around the world!
Lets get one thing out of the way first… CarPro Essence PLUS is NOT Essence… Where Essence could go UNDER the coat, Essence PLUS can go OVER the coat. Essence PLUS is a unique, easy to use, SiO2 coat made from a distinct blend of ceramic coat repair agents, high gloss quartz resins, and hydrophobic nanoparticles!
The concept behind Essence PLUS was an extremely glossy, semi-permanent nano-agent for repairing durable ceramic coatings, which have been abused or mistreated over the course of time. Historically, the only option that a technician had was to polish or compound the damaged ceramic coating and then re-coat, starting from scratch.
However… over the course of development, Essence PLUS grew into something… unexpected but equally satisfying! It is not coated… but uncoated paint that finds its way into the “cross-hairs” of Essence PLUS!
With Essence PLUS, we introduce you to the first NON-abrasive solution to partially repair fine swirls, when an abrasive correction is not in the cards! While increasing the gloss, Essence PLUS simultaneously cleanses the surface, leaving a “smooth as glass” feel and amazing hydrophobic properties!
Features:
High Gloss Jeweling Coat
Repairs Nano Coatings
Adds layer of SiO2 Quartz protection
Excellent Hydrophobic Agent
Produces Extreme Gloss
Use with D/A or by Hand
Cleans, glosses, and protects: bare paint, PPF, chrome, and glass
Formulated for Professional use on previously coated vehicles
Directions for use as coating repair:
Preparation:
1. Wash with Reset, and decontaminate with Iron X, Spotless, and if needed Tar X. Wash and rinse thoroughly.
2. Dry vehicle and wipe down with CarPro Eraser for clean oil free surface
Via Dual Action Polisher:
1. Prime CarPro Gloss pad with Essence PLUS
2. Apply with no pressure in multiple overlapping passes on speed 1-3 across 24” x 24” (60cm x 60cm) section
3. Wipe off with CarPro Microfiber Towel
4. Clean pad with brush and apply 4 Pea size drops
5. Move to next section and repeat steps 2 through 4
Via Hand:
1. Affix CarPro Gloss Pad to CarPro hand applicator strap tool
2. Apply Essence PLUS to the CarPro Gloss pad
3. Without pressure, apply in overlapping figure eight motions across 24” sq. ~ 36” sq. (60cm x 60cm ~ 90cm x 90cm) section.
4. Allow to dry to a slight haze and wipe off with CarPro Microfiber Towel
5. Move to next section and repeat steps 2 through 4
Precautions:
• On coated surfaces – If using machine, use only with CarPro Gloss pad
• On coated surfaces – Avoid “edging” pad into a curve and keep pad flush with paint
• Keep container tightly closed after use
• Keep container out of the sun
• Test product on inconspicuous area before use
• Store in cool dry place
• Keep away from children
• Do not ingest
• Not for use as a primer
FAQ: CarPro Essence PLUS
Q. What tool do you expect Essence PLUS to be used as most?
A. We expect that its most widely used application will be as a solution to a client that wants aggressive decontamination service but is unable to afford polishing… Marring from heavy claying or synthetic clay discs causes marring but with Essence PLUS it can be easily repaired and protected in one step. To be clear this is NOT the way we would use it in all scenarios but this is a widely experience challenge and a solution for it!
Q. Is this like CarPro Essence?
A. NO, this is NOTHING like Essence. This is an ENTIRELY new product.
Q. So how is it different?
A. In just about every way!
PLUS contains zero abrasives!
PLUS is extremely hydrophobic!
PLUS is NOT a primer and Essence is THE Primer.
PLUS is made for using on TOP of a damaged coating (or as another type of service on raw paint)
Q. How are they the same?
A. They both contain a Sio2 coating inside them that has filling capabilities, but Essence PLUS levels existing damaged coatings by building up. CarPro Essence on the other levels mostly with abrasives and partially with Sio2 coat.
Q. Can I use Essence PLUS on top of Essence?
A. Yes!
Q. Can I use Reload over the top of Essence PLUS?
A. Yes!
Q. Can I use Essence PLUS underneath CQuartz like I did with Essence?
A. No, this is not a primer like Essence is and coatings will not bond on top! If used inconjunction with a coating, this goes on TOP, not bottom.
A. Can I use Essence PLUS to repair gloss and hydrophobic to a damaged coating?
Q. Yes, depending on the level of damage you certainly can. That was the primary concept for this product. In some cases over time or through abuse, a coating can become damaged. Rather then removing and replacing the coating as your only option, we designed ES PLUS to provide another option of correcting or extending its life.
A. How long does it last?
Q. The truth is we cannot yet say. We have not yet tested to full capacity and we will certainly keep you updated as continued testing from all climates comes back. Early testing suggests months of beading and up to a year of repair to faint swirls.
A. If I want to use it on a damaged coating, should I use a Microfiber pad and machine?
Q. No, The Microfiber pad is abrasive and will remove the coating! You want to use only a CarPro Gloss pad as directed OR use by hand as directed. If that is not sufficient then you would be better off switching to CarPro Essence and other methods.
Cquartz Fabric Coat (100ml)
Cquartz Fabric protection is nano-technology based and is an extremely durable Super HydroPhobic product for fabric protecting against sweat, salt, water, liquids, dirt, bacteria, and stains. Fabric Coat does all this without affecting the breath-ability of the material. Traditional products make fabrics feel stiff and clog the weave of the fabric, preventing breath-ability. They are unable to stand up to tough cleaners and less resistant to wear. Using nanotechnology, our treatment is small enough to attach to individual fibers, delivering superior performance characteristics without compromising the look, feel, or comfort of the fabric and without clogging the fabric weave.
Cquartz Fabric transforms the substrate into a super hydrophobic surface that is both durable, flexible, and long lasting against harsh or caustic detergents.
Areas Of Application:
Convertible Tops
Seats
Upholstery
Carpets
Mats
And more…
Features:
Super Hydrophobic: Liquids are repelled instantly
Durability: Withstands mechanical wear for up to a year and withstands strong soaps and high pH intensive detergents
UV protection: Protects against UV degeneration while maintaining the supple feel and original color of treated surfaces
Breathability remains
Versatility: Protect many surfaces such as fabric upholstery, carpets, mats, & convertible fabric tops
Long lasting protection for textiles against water, dirt and grease
Appearance: Transparent
Revives dull faded interiors and protects them from further attack
Resists bacteria growth from sweat, dirt, oils, and liquids
Requires less cleaning: In most cases simply wipe with a wet microfiber towel
Other Details:
Coating Amount : 50ml treats approximately 12 Sq. Ft.
Apply using Sprayer, electric atomizer or by brushing
Directions:
Clean the surface completely from dirt, dust, and all oil using “Interior safe” Apc mix with no residues and dry completely
Shake CQ Fabric Coat well
Spray onto surface evenly.
Use heat gun to dry well or park in the sun
AfterCare:
Avoid using car shampoos containing wax or silicones or they will affect the super hydrophobic effect.
Precautions:
Test in inconspicuous area on any surface you are unsure of
Not suitable for Leather
Do not dilute
Use in ventilated area
Avoid Skin and eye contact
Keep Container closed after use
Keep away from Children
We’ve worked tirelessly on this since 2017 and we’re excited finally announce CQUARTZ UK Edition 3.0! We’ve increased the resistance to road salt build up, while keeping the same great chemical resistance of pH 3~14.
We listened to you when you told us it had to be easy to use, this added a few extra months to our process but we know you’ll love it. For the first time ever CQUARTZ UK 3.0 is easy from 3oC up to 40oC!
Keeping with the classic CQUARTZ UK wipe on wipe off application it can be buffed immediately or left on few minutes while still buffing off super clean and easy. For enthusiastic car lovers or Pro detailers, both same most easy to use coating without sticky surface or grabby wipe off!
As you would expect from CARPRO we’ve stuck to our ethos, of under promising and over delivering so as with all our coatings we will give you a conservative real world durability, in this case it’s 18-24 months on CQUARTZ UK Edition 3.0.
– SiO2 is one of the hardest material in the world.
– It creates a very clear but still long lasting hard coating on automotive surfaces.
Kit Includes:
– 50ml bottle of CQuartz UK Edition (Approximately 2 average size vehicles)
– Large Size Applicator Block
– 4″ Microfiber Suede Applicators
– 16″ Microfiber Suede Towel
Features:
– Compare to the best professsional cotings available but easy to use for the amateur detailer
– CQuartz UK is the easiest to apply coating on the market. No matter how cold, hot, or humid the application is simple.
– CQUK has 70% SiO2 with 99.9% purity
– Average thickness of Cquartz UK layer is between 1 m ~2.5 m.
– Minor swirl filling abilities
– Cquartz UK offers an extremely durable hard glass coat which can protect for more than 2 years against minor scratches, acid rain, bird droppings, corrosive traffic film, tar and harmful UV rays.
– As well as protecting it also offers a deep, rich gloss with self cleaning properties, making future washing of your vehicle, faster and easier. CQ UK can prevent 50% of light wash marring.
– Ultra hard CQuartz UK contains ceramic nano particles found within glass, the result is a highly reflective, transparent layer.
– Once applied, Cquartz forms a strong chemical bond, cross linking during the curing process. This offers excellent durability, with a high level of gloss & reflectivity.
– Cquartz UK active ingredients form a precise and uniformed level layer, giving strong water and oil repellence. Thus preventing stains on the paints surface.
– Resists extremely high temperatures. Feel free to coat engine components, etc that correspond to the materials shown.
– Can also be layered: Allow 1 hour minimum wait time after buffing to allow cure before applying another coat.
Surfaces you can protect with CQuartz:
– Paint
– Wheels
– Chrome
– Metals
– Headlights
– And more
Specifications:
– Recommended working temperatures: 3c to 40c
– Durability: 2 years
– Water contact angle: 110 for a minimum of 12 Months
– Light marring filling properties
– Thick layer: 1~2 Micron each
CarPro UK Preparation Tips:
– If contamination exists it is recommended that you IronX and clay your vehicle before polishing.
– To gain the most from Cquartz it is recommended that your vehicle have all painted surfaces clean and polished to a high standard.
– There should not be any wax, sealant, polishing oils, or oil of any kind left on the paint before application. That would hamper the penetration of Cquartz and seriously compromise durability.
Directions:
– After polishing your vehicle use CarPro Eraser to wipe down the surface to ensure no oils are left from polishing
– Wrap a mf Suede (included) around the applicator block (also included)
– Shake CQuartz UK well and apply to the applicator 3-4 drops
– Starting at the middle of the panel first wipe left and right spreading product across panel and the criss cross motion overlapping entire section or panel until all areas have completely flashed and no longer appear wet with coating.
– Using your 16″ MF suede towel (included) thoroughly and completely wipe the panel or section to create a flat even finish.
– Move to next panel and repeat
– To layer Cquartz UK, allow 1 hour between coats and 1 hour before Reload after desired coat number has been reached. (do not use reload or eraser between layers of CQUK if applying after 1 hour of last coat)
– Small 4″x4″ suedes should be used on no more than 2 panels and submerged in water, excess squeezed out, before being bagged and disposed of.
– Large 16″x16″ suedes should be used on no more than 1 coat and submerged in water, excess squeezed out, before being bagged and disposed of
More 16″x16″ suedes can be purchased here we recommend a minimum of 5 additional purchased for 2 layers of Cquartz on one car.
If you do not have extra suede buffing towels, use a soft microfibre to remove the excess from the coating, before a final buff just to remove any missed high spots with the suede towel.
CarPro UK After Tips:
– Park vehicle in direct sun any time after application is complete.
– Keep surface dry for at least one hour after application
– Wipe any water off the surface during the first 24 hours after application
– Avoid washing with any soaps for the first 7 days
Precautions:
– Never allow highly alkaline (ph12+) chemicals such as non-diluted all purpose cleaners to sit or dwell on the surface for extended periods. This may damage the coating.
– Do not apply in direct sun or on hot surface
– Do not re-use Suede applicators or microfibres after 1 vehicle as they will crystalize and could scratch paint if re-used
– Wear hand protection (disposable gloves)
– We always recommend using respiratory protection when needed as a precaution with any chemicals from any company.
We’ve worked tirelessly on this since 2017 and we’re excited finally announce CQUARTZ UK Edition 3.0! We’ve increased the resistance to road salt build up, while keeping the same great chemical resistance of pH 3~14.
We listened to you when you told us it had to be easy to use, this added a few extra months to our process but we know you’ll love it. For the first time ever CQUARTZ UK 3.0 is easy from 3oC up to 40oC!
Keeping with the classic CQUARTZ UK wipe on wipe off application it can be buffed immediately or left on few minutes while still buffing off super clean and easy. For enthusiastic car lovers or Pro detailers, both same most easy to use coating without sticky surface or grabby wipe off!
As you would expect from CARPRO we’ve stuck to our ethos, of under promising and over delivering so as with all our coatings we will give you a conservative real world durability, in this case it’s 18-24 months on CQUARTZ UK Edition 3.0.
– SiO2 is one of the hardest material in the world.
– It creates a very clear but still long lasting hard coating on automotive surfaces.
Kit Includes:
– 30ml bottle of CQuartz UK Edition (Approximately 2 average size vehicles)
– Large Size Applicator Block
– 4″ Microfiber Suede Applicators
– 16″ Microfiber Suede Towel
Features:
– Compare to the best professsional cotings available but easy to use for the amateur detailer
– CQuartz UK is the easiest to apply coating on the market. No matter how cold, hot, or humid the application is simple.
– CQUK has 70% SiO2 with 99.9% purity
– Average thickness of Cquartz UK layer is between 1 m ~2.5 m.
– Minor swirl filling abilities
– Cquartz UK offers an extremely durable hard glass coat which can protect for more than 2 years against minor scratches, acid rain, bird droppings, corrosive traffic film, tar and harmful UV rays.
– As well as protecting it also offers a deep, rich gloss with self cleaning properties, making future washing of your vehicle, faster and easier. CQ UK can prevent 50% of light wash marring.
– Ultra hard CQuartz UK contains ceramic nano particles found within glass, the result is a highly reflective, transparent layer.
– Once applied, Cquartz forms a strong chemical bond, cross linking during the curing process. This offers excellent durability, with a high level of gloss & reflectivity.
– Cquartz UK active ingredients form a precise and uniformed level layer, giving strong water and oil repellence. Thus preventing stains on the paints surface.
– Resists extremely high temperatures. Feel free to coat engine components, etc that correspond to the materials shown.
– Can also be layered: Allow 1 hour minimum wait time after buffing to allow cure before applying another coat.
Surfaces you can protect with CQuartz:
– Paint
– Wheels
– Chrome
– Metals
– Headlights
– And more
Specifications:
– Recommended working temperatures: 3c to 40c
– Durability: 2 years
– Water contact angle: 110 for a minimum of 12 Months
– Light marring filling properties
– Thick layer: 1~2 Micron each
CarPro UK Preparation Tips:
– If contamination exists it is recommended that you IronX and clay your vehicle before polishing.
– To gain the most from Cquartz it is recommended that your vehicle have all painted surfaces clean and polished to a high standard.
– There should not be any wax, sealant, polishing oils, or oil of any kind left on the paint before application. That would hamper the penetration of Cquartz and seriously compromise durability.
Directions:
– After polishing your vehicle use CarPro Eraser to wipe down the surface to ensure no oils are left from polishing
– Wrap a mf Suede (included) around the applicator block (also included)
– Shake CQuartz UK well and apply to the applicator 3-4 drops
– Starting at the middle of the panel first wipe left and right spreading product across panel and the criss cross motion overlapping entire section or panel until all areas have completely flashed and no longer appear wet with coating.
– Using your 16″ MF suede towel (included) thoroughly and completely wipe the panel or section to create a flat even finish.
– Move to next panel and repeat
– To layer Cquartz UK, allow 1 hour between coats and 1 hour before Reload after desired coat number has been reached. (do not use reload or eraser between layers of CQUK if applying after 1 hour of last coat)
– Small 4″x4″ suedes should be used on no more than 2 panels and submerged in water, excess squeezed out, before being bagged and disposed of.
– Large 16″x16″ suedes should be used on no more than 1 coat and submerged in water, excess squeezed out, before being bagged and disposed of
More 16″x16″ suedes can be purchased here we recommend a minimum of 5 additional purchased for 2 layers of Cquartz on one car.
If you do not have extra suede buffing towels, use a soft microfibre to remove the excess from the coating, before a final buff just to remove any missed high spots with the suede towel.
CarPro UK After Tips:
– Park vehicle in direct sun any time after application is complete.
– Keep surface dry for at least one hour after application
– Wipe any water off the surface during the first 24 hours after application
– Avoid washing with any soaps for the first 7 days
Precautions:
– Never allow highly alkaline (ph12+) chemicals such as non-diluted all purpose cleaners to sit or dwell on the surface for extended periods. This may damage the coating.
– Do not apply in direct sun or on hot surface
– Do not re-use Suede applicators or microfibres after 1 vehicle as they will crystalize and could scratch paint if re-used
– Wear hand protection (disposable gloves)
– We always recommend using respiratory protection when needed as a precaution with any chemicals from any company.
Reviews
There are no reviews yet.