• 39,95

    DLUX Long Life Trim Coat was engineered specifically for coating plastics as well as rubber and metal. It can be used on any wheel finish including clear coated, chrome, aluminum, and plastic. This coating is the pinnacle of Exterior Plastic protection and darkens the trim as well without leaving any slick greasy feel that washes off.
    Suitable as a plastic and metal protector for engine components.
    Contents:
    (1) CQUARTZ DLUX 30ml.
    (1) orange Foam Block Applicator
    (4) 10x10cm Suede MF applicators
    Features:
    Made from quality high grade organic silane. DLUX is a Silane-based glass coating, DLUX Contains more than 50% pure silica!
    Restores faded trim to look like new.
    Lays down a protective film which forms an extremely durable glass coating on top of any substrate it is applied to.
    We have incorporated a totally different nano composition to bond hard to plastic surface and achieve a thick uniformed layer.
    Dlux offers a semi permanent chemical bonding to surface pores
    Very easy to apply with great UV protection, on all exterior substrates.
    Can be used on textured or smooth plastic
    DLUX also offers semi permanent protection of aluminum wheels & Plastic finished wheels.
    On wheels, DLUX will repel dirt and dust with ease & aid in the removal of brake dust.
    DLUX will leave a glossy finish and is entirely hydrophobic.
    Heat resistance to 800c+
    Durability: 12+ months
    Average use for 4 wheels and plastic trim = 10-15ml.
    Directions
    Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun.)
    Scrub surface with an all purpose cleaner and or water spot remover, rinse clean, and allow to dry.
    Use ERASER to remove any residue left by the APC or oil film and wait until the cleaned area is completely dry.
    Wet the applicator with 5-6 drops of DLUX and spread evenly across the surface.
    Let cure for 1 minute before buffing.
    in the case of wheels, apply to full face then buff, then full rear barrel allow 1 minute cure then buff
    Allow the surface to cure for 1-3 hours without any moisture on its surface.
    Completely cured with NO rain requires 24 hours. (Any water marks from rain must be wiped off during first 24Hrs as a precaution)
    Cautions:
    Never allow highly alkaline (ph12+) chemicals such as non-diluted all purpose cleaners to sit or dwell on the surface for extended periods. This may damage the coating.
    Do not use for other purposes.
    If it becomes sticky and tough to remove apply more dlux over the top and buff immediately then work in smaller sections after this or omit the 1 minute cure.
    Keep out of reach of children.
    Keep away from heat.
    Do not ingest.
    Avoid contact from eyes.
    Wear gloves and face mask during removal

  • 2,95

    Applicator

    Excellent at its job , as a bonus it makes your tyre product last much longer!


  • 14,95

    PLASTIC, ENGINE, RUBBER, LEATHER

    PERL by CarPro is a concentrated versatile water-based, protective coating for plastics, rubber, and leather that offers tremendous UV protection.  PERL is a water based dilute to suit product, covering a large array of tasking within car care.  It can be used to restores the like-new appearance of hard exterior plastic surfaces and keeps them looking good with strong UV and hydrophobic protection.  The sun can be damaging on flexible materials, like rubber, plastic, and leather. Gradually & over the course of time they fade & become brittle and cracked.  PERL is changing the rules. PERL provides excellent protection and lasts up to three months!

    Features:

    UV protection: It protects against high grade UV degeneration while maintaining the supple feel and original color of treated surfaces.

    Versatility: Interior Vinyl, Plastics, and Finished Leather / Exterior Plastic and Rubber Trim, Window Seals & Tires / Engine bays

    Price and Value: PERL is sold in a concentrated form, offering tremendous value. Dilute it with water according to the instructions and pour into a spray bottle.

    Appearance: Rich Satin look but not greasy

    Revives dull, faded rubber, plastics, vinyl, acrylic, and leather.

    Water-based and contains no solvents. It will not damage tires or dry out plastic. But once dry it offers a terrific hydrophobic layer repelling water, dirt, and grime.

    Stops leather cracking and protects it from dirt and stains.

    Surfaces treated with PERL will require less cleaning and they will retain their like-new look longer.

    Dilutions: (Note- You are welcome to adjust any of the dilutions as you see fit and find many options work very well)  Below are some suggestions

    External Plastics: 1 part Perl / 1~3 parts water

    Engine: 1 part Perl / 1~3 parts water

    Tires & Rubber: Undiluted~1:1 (I recomend 1:1)  2 thin coats with 20 minutes or more between will offer the best looking dark black tires you will find.

    Interior Vinyl and Leather: 1 part PERL / 5 Parts water

     

    Directions:

    Clean the surface from dirt, oil, and dust

    Shake Diluted spray bottle

    Spray onto surface and wipe in evenly

    Wipe off as needed 

    Precautions:

    Keep away from heat

    Use in ventilated area

    Avoid Skin and eye contact

    Keep Container closed after use

    Keep away from Children

Navigation

My Cart

Close
Viewed

Recently Viewed

Close

Great to see you here !

A password will be sent to your email address.

Already got an account?

Quickview

Close

Categories