• 46,95

    TIME IS MONEY… SAVE IT! 
    Tired of spending countless hours cutting heavy defects out of the paint?  Who isn’t?  For the past few years CarPro has been working towards creating a fast and heavy cutting compound, vastly more aggressive than any compound CarPro has produced before!  The result is…. CarPro ClearCut!  CarPro ClearCut is the compound you reach for BEFORE your finishing polish, such as Reflect!  CarPro ClearCut was developed to QUICKLY remove defects whilst allowing you to easily view your work through the polish.  Within 1-2 passes you can begin to watch the defects literally disappear before your eyes as the compound begins to become transparent.  This allows you to continue cutting as needed OR stop as soon as the defects are removed and you find yourself ready for finishing polish.  In some cases and with the correct combinations this incredible next-gen compound may also be used as a 1 step product!
    CarPro ClearCut is an extremely fast acting liquid abrasive built from the ground up for efficiency, performance, and speed!  Unlike other popular compounds on the market ClearCut doesn’t fool you by swelling the paint or hiding water spots and scratches just to see them re-surface later!  With NO fillers ClearCut wipes off fully and a simple Eraser wipe down EASILY removes any lubricants. 
    Unlike compounds of the past, CarPro ClearCut has its own method of application for optimal results… reversing the traditional “heavy to light” method, we start with lighter pressure and finish heavy!  Additionally I find myself using a bit more compound with ClearCut than I do with traditional compounds.  While ClearCut cuts like a Ginsu, it is also low dusting and wipes off with ease!  Say goodbye to hours of wasted time and hello to efficiency and less labor costs!  
    Buy yours today!
    Features:
    Next-Gen Compound
    Cuts FAST!
    Saves time
    Zero Fillers
    Low dusting
    Removes p1000 grit and up
    Body shop safe
    Compatible with both Dual Action and Rotary machine
    Compatible with a variety of foam, microfiber, and wool pads
    Specifications:
    Size: 250ml
    Color: White
    Directions:
    For Dual Action use:
    Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
    Spread product across section
    Raise speed to HIGH speed with LOW pressure 
    Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
    Increase pressure with each pass, finishing down with heavier pressure 
    When scratches are gone or polish has been worked through, wipe clean with microfiber towel
    Clean pad
    Move to next section -> Apply 6 – 8 pea size drops to pad and repeat steps 2-7.
    For Rotary use:
    Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
    Spread product across section
    Keep polisher on low speed with LOW pressure 
    Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
    Increase pressure with each pass, finishing down again with low pressure 
    When scratches are gone or polish has been worked through, wipe clean with microfiber towel
    Clean pad
    Move to next section -> Apply 6 – 8 pea size drops to pad and repeat steps 2-7.
     
    Tips:
    We recommend following with CarPro Reflect or Essence.

  • 16,95

    TIME IS MONEY… SAVE IT! 
    Tired of spending countless hours cutting heavy defects out of the paint?  Who isn’t?  For the past few years CarPro has been working towards creating a fast and heavy cutting compound, vastly more aggressive than any compound CarPro has produced before!  The result is…. CarPro ClearCut!  CarPro ClearCut is the compound you reach for BEFORE your finishing polish, such as Reflect!  CarPro ClearCut was developed to QUICKLY remove defects whilst allowing you to easily view your work through the polish.  Within 1-2 passes you can begin to watch the defects literally disappear before your eyes as the compound begins to become transparent.  This allows you to continue cutting as needed OR stop as soon as the defects are removed and you find yourself ready for finishing polish.  In some cases and with the correct combinations this incredible next-gen compound may also be used as a 1 step product!
    CarPro ClearCut is an extremely fast acting liquid abrasive built from the ground up for efficiency, performance, and speed!  Unlike other popular compounds on the market ClearCut doesn’t fool you by swelling the paint or hiding water spots and scratches just to see them re-surface later!  With NO fillers ClearCut wipes off fully and a simple Eraser wipe down EASILY removes any lubricants. 
    Unlike compounds of the past, CarPro ClearCut has its own method of application for optimal results… reversing the traditional “heavy to light” method, we start with lighter pressure and finish heavy!  Additionally I find myself using a bit more compound with ClearCut than I do with traditional compounds.  While ClearCut cuts like a Ginsu, it is also low dusting and wipes off with ease!  Say goodbye to hours of wasted time and hello to efficiency and less labor costs!  
    Buy yours today!
    Features:
    Next-Gen Compound
    Cuts FAST!
    Saves time
    Zero Fillers
    Low dusting
    Removes p1000 grit and up
    Body shop safe
    Compatible with both Dual Action and Rotary machine
    Compatible with a variety of foam, microfiber, and wool pads
    Specifications:
    Size: 250ml
    Color: White
    Directions:
    For Dual Action use:
    Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
    Spread product across section
    Raise speed to HIGH speed with LOW pressure 
    Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
    Increase pressure with each pass, finishing down with heavier pressure 
    When scratches are gone or polish has been worked through, wipe clean with microfiber towel
    Clean pad
    Move to next section -> Apply 6 – 8 pea size drops to pad and repeat steps 2-7.
    For Rotary use:
    Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
    Spread product across section
    Keep polisher on low speed with LOW pressure 
    Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
    Increase pressure with each pass, finishing down again with low pressure 
    When scratches are gone or polish has been worked through, wipe clean with microfiber towel
    Clean pad
    Move to next section -> Apply 6 – 8 pea size drops to pad and repeat steps 2-7.
     
    Tips:
    We recommend following with CarPro Reflect or Essence.

  • 28,95

    TIME IS MONEY… SAVE IT! 
    Tired of spending countless hours cutting heavy defects out of the paint?  Who isn’t?  For the past few years CarPro has been working towards creating a fast and heavy cutting compound, vastly more aggressive than any compound CarPro has produced before!  The result is…. CarPro ClearCut!  CarPro ClearCut is the compound you reach for BEFORE your finishing polish, such as Reflect!  CarPro ClearCut was developed to QUICKLY remove defects whilst allowing you to easily view your work through the polish.  Within 1-2 passes you can begin to watch the defects literally disappear before your eyes as the compound begins to become transparent.  This allows you to continue cutting as needed OR stop as soon as the defects are removed and you find yourself ready for finishing polish.  In some cases and with the correct combinations this incredible next-gen compound may also be used as a 1 step product!
    CarPro ClearCut is an extremely fast acting liquid abrasive built from the ground up for efficiency, performance, and speed!  Unlike other popular compounds on the market ClearCut doesn’t fool you by swelling the paint or hiding water spots and scratches just to see them re-surface later!  With NO fillers ClearCut wipes off fully and a simple Eraser wipe down EASILY removes any lubricants. 
    Unlike compounds of the past, CarPro ClearCut has its own method of application for optimal results… reversing the traditional “heavy to light” method, we start with lighter pressure and finish heavy!  Additionally I find myself using a bit more compound with ClearCut than I do with traditional compounds.  While ClearCut cuts like a Ginsu, it is also low dusting and wipes off with ease!  Say goodbye to hours of wasted time and hello to efficiency and less labor costs!  
    Buy yours today!
    Features:
    Next-Gen Compound
    Cuts FAST!
    Saves time
    Zero Fillers
    Low dusting
    Removes p1000 grit and up
    Body shop safe
    Compatible with both Dual Action and Rotary machine
    Compatible with a variety of foam, microfiber, and wool pads
    Specifications:
    Size: 500ml
    Color: White
    Directions:
    For Dual Action use:
    Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
    Spread product across section
    Raise speed to HIGH speed with LOW pressure 
    Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
    Increase pressure with each pass, finishing down with heavier pressure 
    When scratches are gone or polish has been worked through, wipe clean with microfiber towel
    Clean pad
    Move to next section -> Apply 6 – 8 pea size drops to pad and repeat steps 2-7.
    For Rotary use:
    Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
    Spread product across section
    Keep polisher on low speed with LOW pressure 
    Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
    Increase pressure with each pass, finishing down again with low pressure 
    When scratches are gone or polish has been worked through, wipe clean with microfiber towel
    Clean pad
    Move to next section -> Apply 6 – 8 pea size drops to pad and repeat steps 2-7.
     
    Tips:
    We recommend following with CarPro Reflect or Essence.

  • 22,00

    CarPro Fixer is an advanced, 1-Step polishing compound featuring a blend of Nanotechnology ingredients, and sophisticated diminishing abrasive powders. It is capable of tackling a wide variety of paintwork correction needs from the removal of P1500 wetsanding scratches, to final finishing on most vehicle paints, including soft Asian clearcoats and hard Scratch-Resistant ceramic finishes. Fixer’s rapid working cycle, and silicone/filler-free formula also ensures maximum results in a minimal amount of time with no drop-back.

    Size: 500ml
    1-Step Nano Polish
    Body Shop Safe
    Fast Results

  • 37,50

    FOR SEVERELY MARKED PAINTWORK

    H8 Heavy Cut is a heavy cutting compound ideal for the removal of heavy oxidation, random deep scratches (RDS), paint bloom and up to P1500 sanding marks. The diminishing abrasives get to work on extreme blemishes before breaking down to refine the paintwork to a shine that requires minimal refining. The unique formulation means H8 Heavy Cut can be worked for prolonged periods of time without drying out.

    Features & Benefits:

    • Heavy cutting compound quickly removes severe paintwork blemishes
    • Suitable for use with all types of paintwork including soft & scratch-proof
    • Combines a high level of cutting power with a high final gloss
    • Low dust generation

    Directions for Use:

    • Select a wool pad or cutting pad
    • Apply compound using medium pressure and at medium speed
    • Buff residue with soft microfibre cloth
    • For best results finish with Hochglanz-Antihologramm-Politur
    • Download: Koch-Chemie Heavy Cut 8.02 User Guide

    Technical Specification:

    • Cut: 8.5
    • Gloss: 5.0
    • Silicone-free
    • Oil-free

  • 37,60

    FOR SEVERELY MARKED PAINTWORK

    H9.01 Heavy Cut is a heavy cutting compound ideal for the removal of heavy marring, elimination of deep scratches, effective removal of paint mists and sanding traces of up to 1,200 grain. With its abrasive grain, Heavy Cut 9.01 achieves an extremely high level of cut with an excellent gloss level and can be polished for prolonged periods without sticking. Suitable for all types of paint (both soft and scratch-proof).

    Features & Benefits:

    • Heavy cutting compound quickly removes heavily weathered blemishes
    • Suitable for use with all types of paintwork including soft & scratch-proof
    • Combines a high level of cutting power with a high final gloss
    • Low dust generation + low stick

    Directions for Use:

    • Select lambskin or heavy cut pad
    • Apply compound using medium pressure and at medium speed
    • Buff residue with soft microfibre cloth
    • Finish with Micro Cut M3.02 for the best possible finish
    • Download: Koch-Chemie Heavy Cut 9.01 User Guide

    Technical Specification:

    • Cut: 9.0
    • Gloss: 5.0
    • Silicone-free
    • Oil-free

  • 40,60

    Coarse-grained, modern grinding polish for fast processing of heavily weathered paints. 

    Due to the amount and the very homogenous abrasive grain, this sanding polish ensures a 

    fast and high sanding performance for the reliable removal of scratches and sanding marks 

    from a grain size of P1500. Can be used on ALL (including scratch-resistant) fresh and cured

    paints. Silicone and solvent-free.


    For processing we recommend the red polishing sponge or lambskin. Apply sufficient amount of 

    HC 4000 to the paint defect / surface or polishing sponge. Distribute evenly over the defect at

    a low speed (approx. 1.000 rpm), speed to approx. 1.800 rpm. increase and polish off the flaw 

    with light pressure.


  • 48,72

    Angelwax RESURRECTION HEAVY CUT COMPOUND, is a heavy cut, intensive surface polishing compound that has been formulated to remove heavy scratches, paint defects and sanding marks up to 1,500 grade.
    Angelwax RESURRECTION has been designed to diminish without sticking and with very low dust formation. Angelwax RESURRECTION is silicone free and suitable for all types of paint.
    Available in 500ml, 1L and 5L bottles.
    Directions: Shake well before  use. Always check the compatibility and suitability of  the paint surface by testing in an inconspicuous area. Apply the desired amount of  polish to the Angelwax hard, heavy grade polishing pad. Use a rotary or dual action polishing machine at a maximum of 2000 rpm. Remove any remaining traces of polish with a microfibre cloth.
    Once the 1st stage is complete, continue with Angelwax REGENERATE medium grade cutting compound or finish with Angelwax REDEMPTION micro fine polish.
    Remove any remaining traces of polish with a soft, clean, dry microfibre cloth.
    Top Tip:   Prior to  machine polishing, use Angelwax STRIPPED-EASE panel wipe to suitably clean and prepare the paint surface.

  • 26,95

    Angelwax RESURRECTION HEAVY CUT COMPOUND, is a heavy cut, intensive surface polishing compound that has been formulated to remove heavy scratches, paint defects and sanding marks up to 1,500 grade.
    Angelwax RESURRECTION has been designed to diminish without sticking and with very low dust formation. Angelwax RESURRECTION is silicone free and suitable for all types of paint.
    Available in 500ml, 1L and 5L bottles.
    Directions: Shake well before  use. Always check the compatibility and suitability of  the paint surface by testing in an inconspicuous area. Apply the desired amount of  polish to the Angelwax hard, heavy grade polishing pad. Use a rotary or dual action polishing machine at a maximum of 2000 rpm. Remove any remaining traces of polish with a microfibre cloth.
    Once the 1st stage is complete, continue with Angelwax REGENERATE medium grade cutting compound or finish with Angelwax REDEMPTION micro fine polish.
    Remove any remaining traces of polish with a soft, clean, dry microfibre cloth.
    Top Tip:   Prior to  machine polishing, use Angelwax STRIPPED-EASE panel wipe to suitably clean and prepare the paint surface.

  • 32,50

    Removes deep scratches, acid rain or severe swirls/holograms.

    • Fast cutting compound with advanced technology
    • Quick removal of 1200 grit and finer sanding marks for easier polishing
    • Works great on fresh & cured paints


  • 45,46

    Meguiars M101 Foam Cut Compound is an ultra heavy cut compound that is

    designed to remove all types of paint defects including swirls, oxidation, sanding marks,

    scratches, and basically anything else that hinders the appearance of your paint. Unlike a traditional

    heavy cut compound, Meguiars M101 Foam Cut Compound is designed to be used with a foam cutting pad.

    This makes Meguiars M101 Foam Cut Compound incredibly easy to use while providing a finish that is

     typically expected from a polish and not a compound. Meguiars M101 Foam Cut Compound is

    body shop safe and is ideal for both the professional and the enthusiast.

     


  • 35,50

    Meguiar’s® Mirror Glaze® M105 Professional Ultra-Cut Compound is great for removing scratches, defects, acidrain and severe swirls/holograms.

    • Exclusive, super-micro abrasive technology
    • Ultra-fast cutting removes 1200 or finer sanding marks
    • Super-micro abrasives leave best in class finish

     


  • 144,97

    Meguiar’s® Mirror Glaze® M105 Professional Ultra-Cut Compound is great for removing scratches, defects, acidrain and severe swirls/holograms.

    • Exclusive, super-micro abrasive technology
    • Ultra-fast cutting removes 1200 or finer sanding marks
    • Super-micro abrasives leave best in class finish



  • 46,72

    QUICK & CONSISTENT: Fast, even cut with extremely high gloss finish

     

    PRO AUTO BODY COMPOUND: Pro-grade compound for quick removal of 1,200 grit or finer sanding marks

     

    VERSATILE USE: Incredible results with short & long-throw DA, or Rotary

     

    EASY TO USE: Easy wipe-off, virtually zero dusting or sling with long work cycle

     

    PRO RESULTS: For optimum show car results, follow with Meguiar’s M210 Mirror Glaze Ultra Pro Finishing Polish to refine paint to a deep, glossy finish

  • 48,23

    MC 3000 MEDIUM CUT ONE STEP


    DESCRIPTION

    One-step sanding/high gloss polish to remove fine scratches and marks from P3000 grit in one operation. Hologram free! The unique abrasive grain contained in the fine abrasive paste grinds continuously during processing so finely that, despite the high grinding performance, in only one polishing step, a perfect paint surface is achieved. Silicone and solvent-free. MC 3000 is fully suitable for all commercially available paint systems, including scratch-resistant paints.


    PROCEDURE

    For processing we recommend the orange polishing pad or lambskin. Apply sufficient amount of MC 3000 to the polishing sponge or paint surface, spread at low speed (approx. 1.000 rpm) on the defect and apply approx. 1.800 rpm. and moderate pressure.


    NOTE: Always use a clean polishing pad to avoid unnecessary damage to surfaces. A safety data sheetis available on request.

    Application with: Polishpad (orange/medium)


    ZV-ST00075010MC



  • 8,37

    Menzerna Heavy Cut Compound 400 is the long anticipated new compound from Menzerna Polishing Compounds that was designed to deliver the fast cutting action of a compound with the finish and workability of a polish. Menzerna Heavy Cut Compound 400 will quickly become an asset to the professional reconditioning industry with its ability to effortlessly remove 1200 grit sanding marks, heavy scratches, swirls and oxidation on all paint systems while leaving a high gloss finish that is not typically expected from a compound.

     

    Menzerna Polishing Compounds made it clear to their engineers during the early development stages of Heavy Cut Compound 400; this compound needed to have a tremendous amount of cut while finishing out better than most medium-cut polishes. Most challenging of all, it had to be user friendly so beginners and professionals alike could reap the benefits. It was a feat to overcome but the masterminds at Menzerna successfully came through and the result is the long-anticipated Heavy Cut Compound 400; a true compound that finishes better than most medium-cut polishes. What’s more, Heavy Cut Compound 400 delivers a working time that will put a smile on the faces of professional detailers.

     

    Menzerna Heavy Cut Compound 400 is body shop safe so it doesn’t contain silicones or waxes – two things which are unwanted near fresh paint as they inhibit the paint from properly curing. Menzerna Heavy Cut Compound 400 is the ideal compound for removing up to 1200 grit sanding marks on fresh paint because it cuts fast without creating a fuss. In most cases Heavy Cut Compound 400 will not even dust – something that is a common problem for most other compounds.

     

    Time is money in the professional reconditioning industry and if your compound literally isn’t cutting it, then it’s time to move on and find something that works better. With so many options available from various manufacturers, it can be daunting trying to find the perfect balance of cut, finish and ease of use in a compound. Menzerna Polishing Compounds acknowledges this and takes it into consideration when developing any new product, be it a compound, polish, detail spray or finishing wax. Heavy Cut Compound 400 is a fine example of Menzerna’s commitment to excellence and it will surely become a staple alongside other Menzerna polishes in the professional reconditioning industry.


  • 25,95

    Menzerna Heavy Cut Compound 400 is the long anticipated new compound from Menzerna Polishing Compounds that was designed to deliver the fast cutting action of a compound with the finish and workability of a polish. Menzerna Heavy Cut Compound 400 will quickly become an asset to the professional reconditioning industry with its ability to effortlessly remove 1200 grit sanding marks, heavy scratches, swirls and oxidation on all paint systems while leaving a high gloss finish that is not typically expected from a compound.

     

    Menzerna Polishing Compounds made it clear to their engineers during the early development stages of Heavy Cut Compound 400; this compound needed to have a tremendous amount of cut while finishing out better than most medium-cut polishes. Most challenging of all, it had to be user friendly so beginners and professionals alike could reap the benefits. It was a feat to overcome but the masterminds at Menzerna successfully came through and the result is the long-anticipated Heavy Cut Compound 400; a true compound that finishes better than most medium-cut polishes. What’s more, Heavy Cut Compound 400 delivers a working time that will put a smile on the faces of professional detailers.

     

    Menzerna Heavy Cut Compound 400 is body shop safe so it doesn’t contain silicones or waxes – two things which are unwanted near fresh paint as they inhibit the paint from properly curing. Menzerna Heavy Cut Compound 400 is the ideal compound for removing up to 1200 grit sanding marks on fresh paint because it cuts fast without creating a fuss. In most cases Heavy Cut Compound 400 will not even dust – something that is a common problem for most other compounds.

     

    Time is money in the professional reconditioning industry and if your compound literally isn’t cutting it, then it’s time to move on and find something that works better. With so many options available from various manufacturers, it can be daunting trying to find the perfect balance of cut, finish and ease of use in a compound. Menzerna Polishing Compounds acknowledges this and takes it into consideration when developing any new product, be it a compound, polish, detail spray or finishing wax. Heavy Cut Compound 400 is a fine example of Menzerna’s commitment to excellence and it will surely become a staple alongside other Menzerna polishes in the professional reconditioning industry.


  • 29,95

    Polish to gloss without hazardous solvents.

     

    The innovative cut compound for automotive clear coats leaves a dazzling impression everywhere. Gets sanding marks out of the way in record time- without aggressive, volatile solvents. Works into the finish range without any unpleasant odors thanks to the latest polishing technologies with diminishing abrasives.

     

    Benefits:

     

    Extremly high abrasion

    Extremly fast removal of sanding marks

    High yield

    High-gloss Finish

    No dust formation

    VOC-free in according with DIN EN ISO 11890-2

    Free from unpleasant solvents

    Easy to handle

    Silicone free

     

    CUT / 7,5

     

    GLOSS / 7


  • 26,68

    Menzerna Super Heavy Cut Compound 300 fixes the type of paint defects that other compounds fail to remove in the first polishing step. Formulated by Menzerna of Germany using the feedback of professional detailers all over the world, Super Heavy Cut Compound SHC 300 was designed to tackle severe scratches, swirl marks, water spots, and 1200 grit sanding scratches on all paint systems while requiring minimal polishing afterwards. Simply put, SHC 300 is so versatile that you can use it with a wool pad as your first step, and finish down to a show-car finish using Menzerna SF-4000 and a polishing pad as your second step.

     

    What makes Menzerna Super Heavy Cut Compound 300 unique is its ability to remove heavy paint defects and sanding scratches without requiring two additional polishing steps. Generally speaking, when you use a compound as aggressive as Menzerna Super Heavy Cut Compound 300 you need to follow with a medium cut polish as the 2nd step, and then as a 3rd step you need to use an ultra-fine cut polish.Menzerna SHC 300 eliminates the need for a 2nd step polishing step, letting you go right to a fine-cut polish, thus saving you time and money!

     

    Menzerna Super Heavy Cut Compound 300 is versatile enough to be applied with both a rotary and dual action polisher equipped with either foam or wool pads. If you’re working on a wet sanding project, we would recommend using SHC 300 with a wool cutting pad on a rotary polisher as your first step, and then following with Menzerna SF-4000 with a foam polishing pad on a dual action polisher as your second step.

     

    Menzerna Super Heavy Cut Compound 300 is body shop safe and 100% VOC compliant in all 50 states.

     

    Menzerna Super Heavy Cut Compound 300 is NOT a compound for novice detailers. A compound this aggressive should only be used in the hands of a seasoned professional that has experience polishing various paint systems. Due to the aggressive cutting nature of SHC 300, if you are new to machine polishing or are simply trying to remove swirls in your daily driver (factory paint), a better choice would be Menzerna FG400 Fast Gloss Compound.


  • 9,00

    Menzerna Super Heavy Cut Compound 300 fixes the type of paint defects that other compounds fail to remove in the first polishing step. Formulated by Menzerna of Germany using the feedback of professional detailers all over the world, Super Heavy Cut Compound SHC 300 was designed to tackle severe scratches, swirl marks, water spots, and 1200 grit sanding scratches on all paint systems while requiring minimal polishing afterwards. Simply put, SHC 300 is so versatile that you can use it with a wool pad as your first step, and finish down to a show-car finish using Menzerna SF-3500 and a polishing pad as your second step.

     

    What makes Menzerna Super Heavy Cut Compound 300 unique is its ability to remove heavy paint defects and sanding scratches without requiring two additional polishing steps. Generally speaking, when you use a compound as aggressive as Menzerna Super Heavy Cut Compound 300 you need to follow with a medium cut polish as the 2nd step, and then as a 3rd step you need to use an ultra-fine cut polish.Menzerna SHC 300 eliminates the need for a 2nd step polishing step, letting you go right to a fine-cut polish, thus saving you time and money!

     

    Menzerna Super Heavy Cut Compound 300 is versatile enough to be applied with both a rotary and dual action polisher equipped with either foam or wool pads. If you’re working on a wet sanding project, we would recommend using SHC 300 with a wool cutting pad on a rotary polisher as your first step, and then following with Menzerna SF-4000 with a foam polishing pad on a dual action polisher as your second step.

     

    Menzerna Super Heavy Cut Compound 300 is body shop safe and 100% VOC compliant in all 50 states.

     

    Menzerna Super Heavy Cut Compound 300 is NOT a compound for novice detailers. A compound this aggressive should only be used in the hands of a seasoned professional that has experience polishing various paint systems. Due to the aggressive cutting nature of SHC 300, if you are new to machine polishing or are simply trying to remove swirls in your daily driver (factory paint), a better choice would be Menzerna FG400 Fast Gloss Compound.

  • 1
  • 2

Navigation

My Cart

Close
Viewed

Recently Viewed

Close

Great to see you here !

A password will be sent to your email address.

Already got an account?

Quickview

Close

Categories