• 40,90

    PRO POLISH: Our best finishing and highest gloss polish ever!

     

    EXTREME GLOSS: Creates deep, glossy finish without swirls or holograms

     

    CLEANER POLISH: Designed to remove DA haze or Rotary swirls and leave a flawless finish

     

    EASY TO USE: Easy wipe-off, virtually zero dusting or sling with Rotary or DA Polisher

     

    FLAWLESS FINISH: Engineered for flawless finish after Meguiar’s M110 Ultra Pro Speed Compound even on dark & sensitive paints

  • 24,95

    CarPro Essence: EXTREME Gloss Primer 250ml

    CarPro is turning the wheels of innovation once again!!  CarPro Essence is a unique blend of nano-tech Quartz, high gloss durable resins, and fine abrasives that are blended together at a microscopic level to form something truly ground breaking!  CarPro Essence leaves an amazing high gloss finish with semi-permanent fillers and protective capabilities all built in!

    Paired with a microfiber cutting pad Essence is capable of unexpected cutting power, while a CarPro gloss pad armed with Essence provides gloss we could only dream of until now!  But this is not simply a polish…

    In less than the time you take to polish a car with conventional products, CarPro Essence is capable of removing swirls, building your clear coat thicker, leaving higher gloss, and laying down a semi-permanent coat of protection!  Oh… and it wipes off like a dream!

    Incredibly Essence also leaves a perfectly smooth, deep, reflective, primed layer to build on with CQuartz or Reload!  The primer attribute in Essence makes application of CQuartz easier than ever and bonds together seamlessly, forming a shell of Extreme Gloss and protection!

     

    Features:

    Primes surface for CQuartz or Reload

    Produces Extremely High Gloss

    Semi-permanent filling capabilities

    Adds layer of Sio2 Quartz protection

    Use with D/A, Rotary, or by Hand

     

    Prep:

    Wash, decontaminate, and prep vehicle for polishing (Compound surface if heavily oxidized etc.)

     

    Directions:  

    Shake well

    For more cut use Microfiber cutting pad and prime well

    For finicky and soft paints use microfiber pad

    For maximum gloss use sparingly with CarPro Gloss pad

    Spread evenly across section on low speed

    Polish on medium speed

    Clean pad often

    Clean pads ands towels immediately after use

     

    Precautions:

    Do not ingest

    Keep out of reach of children


  • 39,95

    CarPro Essence: EXTREME Gloss Primer 500ml

    CarPro is turning the wheels of innovation once again!!  CarPro Essence is a unique blend of nano-tech Quartz, high gloss durable resins, and fine abrasives that are blended together at a microscopic level to form something truly ground breaking!  CarPro Essence leaves an amazing high gloss finish with semi-permanent fillers and protective capabilities all built in!

    Paired with a microfiber cutting pad Essence is capable of unexpected cutting power, while a CarPro gloss pad armed with Essence provides gloss we could only dream of until now!  But this is not simply a polish…

    In less than the time you take to polish a car with conventional products, CarPro Essence is capable of removing swirls, building your clear coat thicker, leaving higher gloss, and laying down a semi-permanent coat of protection!  Oh… and it wipes off like a dream!

    Incredibly Essence also leaves a perfectly smooth, deep, reflective, primed layer to build on with CQuartz or Reload!  The primer attribute in Essence makes application of CQuartz easier than ever and bonds together seamlessly, forming a shell of Extreme Gloss and protection!

    Features:

    Primes surface for CQuartz or Reload

    Produces Extremely High Gloss

    Semi-permanent filling capabilities

    Adds layer of Sio2 Quartz protection

    Use with D/A, Rotary, or by Hand

    Prep:

    Wash, decontaminate, and prep vehicle for polishing (Compound surface if heavily oxidized etc.)

     

    Directions:      

    Shake well

    For more cut use Microfiber cutting pad and prime well

    For finicky and soft paints use microfiber pad 

    For maximum gloss use sparingly with CarPro Gloss pad

    Spread evenly across section on low speed

    Polish on medium speed

    Clean pad often

    Clean pads ands towels immediately after use

     

    Precautions:

    Do not ingest

    Keep out of reach of children


  • 37,71

    SUITABLE FOR RECONDITIONING OF MEDIUM TO HEAVILY WEATHERED PAINTWORK.

    Koch Chemie F6.01 is a machine polish which uses a unique aluminium oxide formulation. The sophisticated grain size means a fast removal of wash inflicted scratches can be achieved and paintwork receives a long-lasting deep sheen. Fine Cut F6.01 is suitable for the reconditioning of medium to heavily weathered paintwork and formulated to provide the treatment of scratch-proof paint.

    Features & Benefits:

    • Quickly removes light paintwork blemishes
    • Suitable for use with all types of paintwork including soft & scratch-proof
    • Long-lasting deep sheen
    • Low dust generation

    Directions for Use:

    • Select a wool pad or cutting pad
    • Apply compound using medium pressure and at medium speed
    • Buff residue with soft microfibre cloth
    • For best results finish with Hochglanz-Antihologramm-Politur
    • Download: Koch-Chemie Fine Cut F6.01 User Guide

    Technical Specification:

    • Cut: 6.0
    • Gloss: 7.0
    • Silicone-free
    • Oil-free

    Sizes: 250ml & 1 Litre (Select from drop down menu above)


  • 41,56

    FC 2000 Fine Cut Hologram Remover 750ml



    Anti-hologram polish to effectively remove holograms. Intelligent, self-grinding alumina abrasive grains of the 

    latest generation guarantee a 100% hologram-free paint surface. Free of solvents and silicone – purely water-based.

    Can be used on ALL (including scratch-resistant) fresh and cured paints.


    For processing we recommend the yellow polishing sponge. Apply sufficient amount of FC 2000 to the

    polishing sponge or the paint surface, spread at low speed (about 1.000 rpm) on the defect and at about 

    1.600 rpm. and moderate pressure.



    NOTE: To avoid unnecessary damage to the surface, always use clean polishing pad!


    ZV-ST00075010FC


  • 22,00

    CarPro Fixer is an advanced, 1-Step polishing compound featuring a blend of Nanotechnology ingredients, and sophisticated diminishing abrasive powders. It is capable of tackling a wide variety of paintwork correction needs from the removal of P1500 wetsanding scratches, to final finishing on most vehicle paints, including soft Asian clearcoats and hard Scratch-Resistant ceramic finishes. Fixer’s rapid working cycle, and silicone/filler-free formula also ensures maximum results in a minimal amount of time with no drop-back.

    Size: 500ml
    1-Step Nano Polish
    Body Shop Safe
    Fast Results

  • 42,47

    Advanced Technologyformula produces a deep glossand rich, swirl-free results.

    • Permanently removes swirls & light defects from all paints
    • Produces deep reflections & hi gloss
    • Smooth buffing feel and fast wipe-off

     


  • 144,97

    Advanced Technologyformula produces a deep glossand rich, swirl-free results.

    • Permanently removes swirls & light defects from all paints
    • Produces deep reflections & hi gloss
    • Smooth buffing feel and fast wipe-off



  • 38,90

    SILICONE-OIL-FREE MICRO POLISHING COMPOUND

    Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 on all paint systems (including scratch-resistant). Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades.

    Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered up. Micro Cut M3.02 is extremely economical, easy to polish and easily removed without leaving traces.

    Features & Benefits:

    • Micro-cut finishing polish
    • Removes fine scratches and holograms
    • Suitable for use with all types of paintwork including soft & scratch-proof
    • For use with a forced rotation machine polisher
    • Low dust generation

    Directions for Use:

    • For optimum results use with a random orbital forced rotation polisher
    • Before use, moisten dried or new pads completely with polish
    • Polish crosswise with medium pressure until a transparent film appears
    • Download: Koch-Chemie Micro Cut 3.02 User Guide

    Technical Specification:

    • Cut: 3.2
    • Gloss: 9.0
    • Silicone-free
    • Oil-free

  • 48,23

    MC 3000 MEDIUM CUT ONE STEP


    DESCRIPTION

    One-step sanding/high gloss polish to remove fine scratches and marks from P3000 grit in one operation. Hologram free! The unique abrasive grain contained in the fine abrasive paste grinds continuously during processing so finely that, despite the high grinding performance, in only one polishing step, a perfect paint surface is achieved. Silicone and solvent-free. MC 3000 is fully suitable for all commercially available paint systems, including scratch-resistant paints.


    PROCEDURE

    For processing we recommend the orange polishing pad or lambskin. Apply sufficient amount of MC 3000 to the polishing sponge or paint surface, spread at low speed (approx. 1.000 rpm) on the defect and apply approx. 1.800 rpm. and moderate pressure.


    NOTE: Always use a clean polishing pad to avoid unnecessary damage to surfaces. A safety data sheetis available on request.

    Application with: Polishpad (orange/medium)


    ZV-ST00075010MC



  • 27,35

    Menzerna Medium Cut Polish 2400 is formulated specifically for the new ceramic, scratch-resistant clear coats. Menzerna developed a new family of abrasives that are better able to penetrate the hard paint and level imperfections. Super Intensive Polish is the most aggressive of this new breed of polishes, capable of removing 2000 grit sanding scratches.

     

    Though this is a powerful polish, Menzerna Medium Cut Polish 2400 produces virtually no dust or haze. The polish contains a high concentration of small abrasives, which allows the polish to work cleaner. The tiny abrasives blend away imperfections using consistent abrasive action, meaning the hundreds of abrasives are repeatedly passing over the blemish to gradually eliminate it. The results are smooth, glossy, haze-free paint.

     

    On most paints, you can go straight from Menzerna Medium Cut Polish 2400 to finishing with a wax or sealant without any steps in between. It leaves such a deep gloss, there no need for a finishing polish in many cases.

     

    Menzerna Medium Cut Polish 2400 can be used with a dual action or rotary polisher to remove defects quickly.


  • 9,29

    Menzerna Medium Cut Polish 2400 is formulated specifically for the new ceramic, scratch-resistant clear coats. Menzerna developed a new family of abrasives that are better able to penetrate the hard paint and level imperfections. Super Intensive Polish is the most aggressive of this new breed of polishes, capable of removing 2000 grit sanding scratches.

     

    Though this is a powerful polish, Menzerna Medium Cut Polish 2400 produces virtually no dust or haze. The polish contains a high concentration of small abrasives, which allows the polish to work cleaner. The tiny abrasives blend away imperfections using consistent abrasive action, meaning the hundreds of abrasives are repeatedly passing over the blemish to gradually eliminate it. The results are smooth, glossy, haze-free paint.

     

    On most paints, you can go straight from Menzerna Medium Cut Polish 2400 to finishing with a wax or sealant without any steps in between. It leaves such a deep gloss, there no need for a finishing polish in many cases.

     

    Menzerna Medium Cut Polish 2400 can be used with a dual action or rotary polisher to remove defects quickly.


  • 29,95

    Menzerna Super Finish 3500 this surely has to be one of the most elusive polishes around and we’ve imported it in specially. It’s part of Menzerna’s professional range but can be used with great results by anyone.

    By using a powder fine abrasive, Menzerna Super Finish 3500 will see off fine swirls and defects and leave you with the most reflective and glossy surface imaginable. Menzerna claim that the abrasives are the smallest and most uniform in the world, these particles have a sharp edge that can cut ceramic clear coats as well as the more conventional clear coats. This means that you get the most stunning shine and gloss imaginable.

    With a decent level of cut and extremely high levels of gloss it also means that Menzerna SF3500 is a fantastic one step polish. On softer paints it’s possible to correct and refine with this polish alone, whilst on harder paints it makes it the ideal polish to refine and gloss your paintwork.

    Menzerna 3500 Super Finish was developed to tackle fine surface scratches in the Maybach and Rolls Royce Phantom and other cerami-coat finishes. It is however becoming widly adopted as the new standard in finishing polishes. Menzerna Super Finish 3500 will leave your paint with a mirror shine.

    Will remove fine scratches (2500-3000 grit).

    Super fine abrasives leave a mirror like shine

    Very easy to remove and apply

    Cut: 4 (Max:10.0)

    Gloss: 10 (Max: 10.0)

     


  • 7,35

    Menzerna Super Finish 3500 this surely has to be one of the most elusive polishes around and we’ve imported it in specially. It’s part of Menzerna’s professional range but can be used with great results by anyone.

    By using a powder fine abrasive, Menzerna Super Finish 3500 will see off fine swirls and defects and leave you with the most reflective and glossy surface imaginable. Menzerna claim that the abrasives are the smallest and most uniform in the world, these particles have a sharp edge that can cut ceramic clear coats as well as the more conventional clear coats. This means that you get the most stunning shine and gloss imaginable.

    With a decent level of cut and extremely high levels of gloss it also means that Menzerna SF3500 is a fantastic one step polish. On softer paints it’s possible to correct and refine with this polish alone, whilst on harder paints it makes it the ideal polish to refine and gloss your paintwork.

    Menzerna 3500 Super Finish was developed to tackle fine surface scratches in the Maybach and Rolls Royce Phantom and other cerami-coat finishes. It is however becoming widly adopted as the new standard in finishing polishes. Menzerna Super Finish 3500 will leave your paint with a mirror shine.

    Will remove fine scratches (2500-3000 grit).

    Super fine abrasives leave a mirror like shine

    Very easy to remove and apply

    Cut: 4 (Max:10.0)

    Gloss: 10 (Max: 10.0)

     


  • 26,45

    Menzerna Super Finish Plus 3800 this is a ultra fine finishing polish designed to leave paint with the highest levels of gloss possible.

    This was developed by Menzerna for the new breed of Scratch Resistant Coatings which are being introduced by many of the major paint manufacturers. It contains super fine uniform micro polishing grains to safely and effectively remove very fine 3000 grit marks from paint such as holograming and marring from more abrasive compounds. As such this is in our opinion the finest finishing polish there is, it leaves paint with so much depth and a mirror like gloss it’s sometimes hard to believe. For both professionals and enthusists that strive for perfection this is a must have product.

    Menzerna Final Finsh SF3800 can be used by random orbial or rotary polishing machines and even by hand. For best results we reccommend using this in conjunction with a fine finishing pad.

    Professional grade polish that will deliver stunning results.

    Bodyshop safe formula contains no fillers, silicones, waxes or glazes.

    Easy to apply and remove with less dust.

     


  • 9,00

    Menzerna Super Finish Plus 3800 this is a ultra fine finishing polish designed to leave paint with the highest levels of gloss possible.

    This was developed by Menzerna for the new breed of Scratch Resistant Coatings which are being introduced by many of the major paint manufacturers. It contains super fine uniform micro polishing grains to safely and effectively remove very fine 3000 grit marks from paint such as holograming and marring from more abrasive compounds. As such this is in our opinion the finest finishing polish there is, it leaves paint with so much depth and a mirror like gloss it’s sometimes hard to believe. For both professionals and enthusists that strive for perfection this is a must have product.

    Menzerna Final Finsh SF3800 can be used by random orbial or rotary polishing machines and even by hand. For best results we reccommend using this in conjunction with a fine finishing pad.

    Professional grade polish that will deliver stunning results.

    Bodyshop safe formula contains no fillers, silicones, waxes or glazes.

    Easy to apply and remove with less dust.

     


  • 21,95

    We want professionals who perform perfect jobs, saving time and money. And that is why also developed ONE POLISH. A product for bulk detailers who need to save time in each work ONE POLISH is a complete product that cuts, finishes and protects the paint. Expected durability is between 6 to 12 months.


  • 53,64

    We want professionals who perform perfect jobs, saving time and money. And that is why also developed ONE POLISH. A product for bulk detailers who need to save time in each work ONE POLISH is a complete product that cuts, finishes and protects the paint. Expected durability is between 6 to 12 months.


  • 45,45

    Angelwax REGENERATE MEDIUM CUT COMPOUND & SWIRL REMOVER is an intensive surface polishing compound that has been formulated to remove and correct medium to heavy scratches, swirl marks, paint defects, imperfections and sanding marks up to 2500 grade.

    Angelwax REGENERATE is silicone free and suitable for all types of paint.


  • 39,95

    Angelwax REDEMPTION ULTRA FINE FINISHING POLISH has been designed to permanently remove holograms and fine scratches.
    This ultra fine polishing compound will remove sanding marks to P3000 grain and will add an amazing high gloss finish.
    Angelwax REDEMPTION is silicone free and suitable for all types of paint.
    Available in 500ml, 1L and 5L bottles.
    Directions: Shake the bottle well before use. To ensure the compatibility and suitability of the paint surface, test in an inconspicuous area. Apply the desired amount of polish to the selected machine compounding pad from the Angelwax range.
    Spread the polish around the panel with the  machine polisher switched off. Switch on the machine polisher and apply medium pressure whilst working in a crosswise motion until a clear film appears on the paint surface. Remove the film with a microfibre cloth and finish with a buffing towel.
    Top Tip:  Prior to  machine polishing, use Angelwax STRIPPED-EASE panel wipe to suitably clean and prepare the paint surface. Once the final polish stage  has  been completed, protect the paint surface using Angelwax Ti-22 TITANIUM SPRAY SEALANT and apply a wax from the Angelwax range of detailing waxes.
  • 1
  • 2

Navigation

My Cart

Close
Viewed

Recently Viewed

Close

Great to see you here !

A password will be sent to your email address.

Already got an account?

Quickview

Close

Categories