• 94,38

    This is our high performance foam! Despite the high concentration it dissolves in cold water and can be used in dosing systems or self service stations. Foaming is very high. We recommend to use 100-200 ml in 1L for foam guns. But even if you use only 50ml to 1L it will make a decent foam. It is safe on aluminium, nickel-plated surfaces and other coatings from non-ferrous alloys. This product is developed for car wash stations with high flow and it is our most cost efficient product due to concentration.

    Dilution
    Foam Generators or Sprayers 1:80 – 1:150
    Foam guns 100ml – 200ml in 1L
    Dosing Systems 1.0 – 2.0%


  • 29,04

    This is our high performance foam! Despite the high concentration it dissolves in cold water and can be used in dosing systems or self service stations. Foaming is very high. We recommend to use 100-200 ml in 1L for foam guns. But even if you use only 50ml to 1L it will make a decent foam. It is safe on aluminium, nickel-plated surfaces and other coatings from non-ferrous alloys. This product is developed for car wash stations with high flow and it is our most cost efficient product due to concentration.

    Dilution

    Foam Generators or Sprayers 1:80 – 1:150

    Foam guns 100ml – 200ml in 1L

    Dosing Systems 1.0 – 2.0%

    How to use

    Spray the foam on the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.

    Composition

    Dye > 5%, perfume > 5%, EDTA > 5%, N-Surfactants > 5%, A-Surfactants 5-15%, phosphonates 5-15%, custic soda 5-15%, water < 30%.

    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.


  • 43,56

    That’s what we call a price killer. 

    Simple product for a price that you can beat only with water. 

    Foam is balanced, concentration is fair, it works well in summer conditions when there

     is no heavy dirt of course you can remove it as well but you will need more product.

    For winter conditions and heavy dirt we recommend to use Active Foam PP or Active Foam HP.

    Dilution:

    Foam Generators or Sprayers 1:25 – 1:50

    Foam guns 350ml – 500ml in 1L

    How to use

    Spray the foam on the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.

    Composition

    Fragrance > 5%, A-surfactant > 5%, N-surfactant > 5%, EDTA > 5%, phosphonates 5-15%, caustic soda 15-30%, water < 30%.


  • 65,34

    ACTIVE FOAM PP V2.0

    It is developed for use with hard and cold water. 

    There is always a problem with water softness, some products just don’t work in hard water or don’t work as effectively as they should. 

    Some use water softeners or complicated and expensive systems that makes water softer. So there was an obvious demand for a product that solves this issue. 

    It wasn’t easy but we did it! We made a product that works in hard water and easily dissolves in cold. 

    And even more, it can remove hard dirt even from trucks, it is highly foaming and in strong concentration, so it is cost efficient as well.

    Dilution

    Foam Generators or Sprayers 1:50 – 1:80

    Foam guns 200ml – 300ml in 1L

    Dosing Systems 2.0 – 3.5%

    How to use

    Spray the foam on the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.

    Composition

    Dye ≥ 5%, perfume ≥ 5%, EDTA ≥ 5%, N-Surfactants ≥ 5%, isopropyl alchocol ≥ 5%, A-Surfactants 5-15%, phosphonates 5-15%, custic soda 15-30%, water < 30%.

    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.


  • 43,56

    Detailing foam for a price of a regular foam. Since detailing become more popular there are more coated cars with ceramic, liquid glass or some kind of sealants. Regular car wash stations usually use aggressive cleansers and don’t buy expensive detailing products. What does a coated car need? If a car is coated that more likely means that owner follows up his car condition and heavy dirt is more like an exception. So you don’t need an aggressive cleanser. And if a car is coated that means that product should be free of wax or gloss enhancer as coating does this job better and wax or gloss enhancer just can decrease coatings efficiency. So here it is, Active Foam Safe dedicated detailing foam no wax, no gloss enhancer, no color that doesn’t cost you gazillion and does the job!
    Dilution
    Foam Generators or Sprayers 1:25 – 1:50
    Foam guns 100 – 200ml in 1L
    How to use
    Spray the foam to the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.
    Composition
    Perfume ≥ 5%, EDTA ≥ 5%, N-Surfactants ≥ 5%, A-Surfactants 5-15%, phosphonates 5-15%, custic soda ≥ 5%, water < 30%.
    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.

  • 19,25

    Detailing foam for a price of a regular foam. Since detailing become more popular there are more coated cars with ceramic, liquid glass or some kind of sealants. Regular car wash stations usually use aggressive cleansers and don’t buy expensive detailing products. What does a coated car need? If a car is coated that more likely means that owner follows up his car condition and heavy dirt is more like an exception. So you don’t need an aggressive cleanser. And if a car is coated that means that product should be free of wax or gloss enhancer as coating does this job better and wax or gloss enhancer just can decrease coatings efficiency. So here it is, Active Foam Safe dedicated detailing foam no wax, no gloss enhancer, no color that doesn’t cost you gazillion and does the job!
    Dilution
    Foam Generators or Sprayers 1:25 – 1:50
    Foam guns 100 – 200ml in 1L
    How to use
    Spray the foam to the surface of your vehicle. Leave it for 1-2min (avoid drying) and wash it with high pressure from bottom to up.
    Composition
    Perfume ≥ 5%, EDTA ≥ 5%, N-Surfactants ≥ 5%, A-Surfactants 5-15%, phosphonates 5-15%, custic soda ≥ 5%, water < 30%.
    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.

  • 35,45

    Meguiar’s® All Purpose Cleaner is a versatile cleaner for both exterior and interior surfaces. Its superior foaming action gently lifts the dirt away from carpet, upholstery, vinyl and even leather.

    • Ideal for reconditioning most interior surfaces
    • Active foaming action lifts dirt
    • Fabric softeners enhance luxurious results


  • 18,15

    All Purpose Cleaner 

     

    • All Purpose Interior Cleaning Concentrate

    • Also excels on non-propus surfaces

    • Controlled foam helps prevent overuse

    • Makes upto 40 litres depending on use. 

    • Does not have any harmful effect to interior

     

    Directions: Apply to surface & allow to dwell for up to five minutes. Clean with microfiber or soft brush. Rinse thoroughly.

     

    Trigger spray – Dilute 1:10 -1:20 

    Leather and plastics 1:20

    Upholstery, carpets- heavy dirt 1:10

    Extraction machine – Dilute 1:60

     

  • 55,61

    There is everything you want from shampoo. Highly concentrated, highly foaming, slick and easily dissolves in cold water can be used in bucket, foam gun or dosing system. For a fair price.

    Dilution

    Foam Generators or Sprayers 1:200 – 1:250

    Foam guns 50ml – 100ml in 1L

    Bucket 1:500

    Composition

    ≥ 30% water, ≥ 5% but <15% nonionic surfactants, < 5% salt EDTA, sodium chloride, organic solvent, citric acid, methychloroiscthiazolincne, methylisothiazolinone methylisothiazzolinone, dye.

    Do not allow product to dry out on surfaces. Don’t use it on hot surfaces.


  • 22,69

    BLACK MAMBA  this is flagship product. Made with patented NITREX® polymer, this super strong (over 6.0 mils thick) powder free nitrile glove boasts 3 times the chemical and puncture resistance of a comparable thickness latex or vinyl glove.

    Mamba gloves Feature our grip rite finish for secure handling and dexterity even when working with fine objects.T





  • 11,95

    Active foam with neutral pH for cleaning light and

    moderate dirt. Neutral to waxes and sealants. Safe for

    fragile elements of the car body chrome, aluminum,

    metal). Has a strong, pleasant scent.


    Directions for use:


    Apply to a cool and dry paint. Dilute 125ml of the foam in

    1L of warm water and pour it into the foam blaster (PA).

    Manual foam blaster – Mesto: use 20-40ml of the foam

    per 1–1.5L of warm water. Spread the product evenly on

    the surface and leave it for 4-6 minutes. Do not leave the

    product to dry. Rinse with a pressure washer.


  • 19,95

    WORK STUFF Detailing Buckets – the highest quality buckets for washing cars.
    Main features:
    Strong HDPE material
    Metal handle
    Black Printed Logo, Rinse and Measurements
    20L capacity
    A useful scoop on the side of the bucket
    WORK STUFF Detailing Buckets – professional buckets for everyone.

  • 9,95

    CarPro Bug-Out Insect Removal 500ml

    CarPro BUGOUT is the solution for the one of the greatest detriments to automotive finishes…. BUGS and BUG stains!  Once attached to an automotive surface, the enzymes and proteins inside the guts of the bug harden to the paint and may even etch if left too long.  Some bugs may also have hard shells or pieces that easily scratch the paint when attempting to remove without first softening their sun-dried carcass.  

    In a worst-case scenario you leave bugs on the surface for far too long and they will etch deep into the paint causing permanent damage that cannot be fixed without re-painting!   Now is the time for the BUGS to be OUT, not IN the paint!

    CarPro BUG-OUT safely and easily removes smashed and baked on bugs while softening hard-shelled bugs for safe removal!  CarPro BUG-OUT was developed to be safe on a wide variety of surfaces including paint, clear coat, paint protection film, glass, plastic, mirror, chrome, aluminum, and more!  CarPro BUG-OUT quickly melts much of the dried remains as they slide safely off your paint!

    Get yours today! 

    Features:

    Dissolves & softens insect remains

    Safe on Clearcoat and a wide variety of automotive surfaces

    Safe on coated vehicles

    Safe on Glass

    Safe on PPF

    Gets bugs OUT

    Directions:      

    Shake before use

    Spray on insect remains and insect stains

    Wait 30 seconds ~ 2 minutes depending on environment (less time on sensitive surfaces)

    Agitate as needed with Microfiber towel

    Repeat if needed

    Remove and neutralize any residue with CarPro Ech2o or a Reset shampoo.

    Precautions:

    Avoid use in direct sun

    Test product on inconspicuous area before applying

    Do not ingest

    Keep out of reach of children

    Store in a cool dry place


  • 18,95

    3 Clay bars in one pack : Ultra Fine, Fine & Medium claysFine clay bar is a soft and very elastic, less sticky feeling in hands , 100g clay bar designed for light to medium claying and removal of everyday grime that builds up over time on your paint’s surface. These clay bars are designed for regular usage and maintenance without marking your paint’s surface and is perfectly safe for use with pH neutral lubricants and water as well .

    White – Ultra Fine
    Green – FineYellow – Medium

    Use on any ‘hard’ surface: paint, glass, wheels and plastic trim. Each 100g clay has its own plastic pack , to keep it highly maintained and re-use it again without a risk of dirt attach.


  • 16,95

    The CarPro Hand Wash was designed with a dense, plush twin microfibre blend to ensure safe cleaning with low maintenance. 

    Our synthetic microfibre blend is designed to trap dirt and debris gently lifting them away from the surface to ensure a safe cleaning action on all delicate surfaces. 

    The single sided design reduces hand fatigue by reducing the amount of excess water held by traditional mitts while the soft mesh backing ensures you don’t drop it. 

    All white fibres allows visual inspection ensuring you don’t transfer dirt and debris back to your paintwork creating swirls.

    Minimal drag. 

    • Safe on all surfaces 
    • Low maintenance
    • Soft mesh backing
    • Reduces hand fatigue versus traditional mitts

  • 89,00

    CarPro Iron X advanced pH-balanced (pH-7) formula safely breaks down ferrous metallic contamination caused by automotive brakes, rail travel, and construction from delicate vehicle surfaces. It can be used on paint, plastic, chrome, glass, and alloy wheels. Iron-X works by forming a water-soluble complex with the iron particles lodged in the surface, allowing them to be rinsed free, and cleaning deeper than washing or claying alone. Available in Original, Lemon Scent, and concentrated Paste formulas for stubborn contaminants, Iron X is the original – and still the best – acid-free iron fallout remover.
    The IronX Paint and wheels Decontamination System was developed as a method of removing paint contamination beyond what can be removed by washing or claying alone! If you are familiar with detail clay, you know it is capable of removing above surface contaminants that have bonded to the paint. The IronX is designed to remove what lies below the paint surface as well as above.
    Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint’s sub-layers or paint’s pin-holes. This is a gradual process that often is not evident until it’s too late. Claying does not remove the entire particle which will continue to spread beneath the surface if not dissolved.
    During the use of your vehicle, brake dust and road grime become sintered to the surface of the car paint , rims and wheels due to the high temperature conditions they are normally exposed. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. Iron X opens up the paint’s pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint’s subsurface. Ongoing damage is immediately stopped and future damage is prevented by removing the ferrous particles.
    Iron X sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple/ red. The purple/red coloration is the Iron X Cleaner forming a bond to the sintered iron on the car paint and wheel and changing its state to a water soluble complex for easy removal. Stubborn, baked on grime may take a small amount of agitation. Rinse car paint and wheels thoroughly with a power washer and wipe dry.
    CarPro Iron X is used by body shops for pre-cleaning prior to detailing and by dealerships for new and used car prep. It is proven to deliver a clean, glassy smooth vehicle that is protected from the harmful effects of paint contamination. No other is as fast and effective at removing multi-layer paint and wheels contamination.
    FEATURES:
    Removes Iron Particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
    New Formula combines Cherry perfume to aid in masking Iron Dissolving Chemicals
    Safe to use, Acid Free, and pH neutral (pH 6-7).
    Safe to use on Clear Coat Paint
    Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.
    Safe for use on all solid car surfaces and will not deteriorate clear coats. (Avoid using on Fabric Convertible tops)
    DIRECTIONS:
    1.-Shake the bottle.
    2.-You can cover the surface with Iron X by spraying it everywhere but that can be wasteful. I recommend that you spray as needed and spread it with a small sponge or applicator to cover the entire surface. You may also consider using an atomizer type spray bottle or HVLP gun. In any case evenly cover the surfaces you wish to decontaminate. The product is strong so you don’t have to be wasteful. Just make sure it contacts the entire surface.
    3.-Allow the product to dwell for 5 minutes in the shade. Do not allow it to dry in the sun.  On light colored paints you will see the product dissolving ferrous particles as it turns color. On darker colored paints everything is happening in exactly the same way. It’s simply more difficult for you to view the color changing affect. I have read people saying the product works better on lighter colored cars but that is illogical and is not the case. It works the same regardless of car color.
    4.-After allowing to dwell take a damp (not soaked) grout or other paint safe sponge (or other media if you prefer) and agitate the surface.
    5.-Thoroughly rinse the surface.
    Don’t forget to rinse your media out also. I like to have a dedicated Iron X sponge but that isn’t necessary.
    PRECAUTIONS:
    A.-Use outside or with sufficient ventilation.
    B.-Use latex or Nitrile gloves, and face protection.
    C.-If there is an inordinate amount of tree sap, tar, other organic material, wax, or sealants on the vehicle I recommend you strip them first with TarX so Iron X can attack the ferrous particles without any interference. This is not required but is how I like to do it for best results.
    D.-For best results apply to a mostly dry surface. A few drops of water is ok.

  • 14,95

    CarPro Iron X advanced pH-balanced (pH-7) formula safely breaks down ferrous metallic contamination caused by automotive brakes, rail travel, and construction from delicate vehicle surfaces. It can be used on paint, plastic, chrome, glass, and alloy wheels. Iron-X works by forming a water-soluble complex with the iron particles lodged in the surface, allowing them to be rinsed free, and cleaning deeper than washing or claying alone. Available in Original, Lemon Scent, and concentrated Paste formulas for stubborn contaminants, Iron X is the original – and still the best – acid-free iron fallout remover.
    The IronX Paint and wheels Decontamination System was developed as a method of removing paint contamination beyond what can be removed by washing or claying alone! If you are familiar with detail clay, you know it is capable of removing above surface contaminants that have bonded to the paint. The IronX is designed to remove what lies below the paint surface as well as above.
    Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint’s sub-layers or paint’s pin-holes. This is a gradual process that often is not evident until it’s too late. Claying does not remove the entire particle which will continue to spread beneath the surface if not dissolved.
    During the use of your vehicle, brake dust and road grime become sintered to the surface of the car paint , rims and wheels due to the high temperature conditions they are normally exposed. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. Iron X opens up the paint’s pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint’s subsurface. Ongoing damage is immediately stopped and future damage is prevented by removing the ferrous particles.
    Iron X sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple/ red. The purple/red coloration is the Iron X Cleaner forming a bond to the sintered iron on the car paint and wheel and changing its state to a water soluble complex for easy removal. Stubborn, baked on grime may take a small amount of agitation. Rinse car paint and wheels thoroughly with a power washer and wipe dry.
    CarPro Iron X is used by body shops for pre-cleaning prior to detailing and by dealerships for new and used car prep. It is proven to deliver a clean, glassy smooth vehicle that is protected from the harmful effects of paint contamination. No other is as fast and effective at removing multi-layer paint and wheels contamination.
    FEATURES:
    Removes Iron Particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
    New Formula combines Cherry perfume to aid in masking Iron Dissolving Chemicals
    Safe to use, Acid Free, and pH neutral (pH 6-7).
    Safe to use on Clear Coat Paint
    Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.
    Safe for use on all solid car surfaces and will not deteriorate clear coats. (Avoid using on Fabric Convertible tops)
    DIRECTIONS:
    1.-Shake the bottle.
    2.-You can cover the surface with Iron X by spraying it everywhere but that can be wasteful. I recommend that you spray as needed and spread it with a small sponge or applicator to cover the entire surface. You may also consider using an atomizer type spray bottle or HVLP gun. In any case evenly cover the surfaces you wish to decontaminate. The product is strong so you don’t have to be wasteful. Just make sure it contacts the entire surface.
    3.-Allow the product to dwell for 5 minutes in the shade. Do not allow it to dry in the sun.  On light colored paints you will see the product dissolving ferrous particles as it turns color. On darker colored paints everything is happening in exactly the same way. It’s simply more difficult for you to view the color changing affect. I have read people saying the product works better on lighter colored cars but that is illogical and is not the case. It works the same regardless of car color.
    4.-After allowing to dwell take a damp (not soaked) grout or other paint safe sponge (or other media if you prefer) and agitate the surface.
    5.-Thoroughly rinse the surface.
    Don’t forget to rinse your media out also. I like to have a dedicated Iron X sponge but that isn’t necessary.
    PRECAUTIONS:
    A.-Use outside or with sufficient ventilation.
    B.-Use latex or Nitrile gloves, and face protection.
    C.-If there is an inordinate amount of tree sap, tar, other organic material, wax, or sealants on the vehicle I recommend you strip them first with TarX so Iron X can attack the ferrous particles without any interference. This is not required but is how I like to do it for best results.
    D.-For best results apply to a mostly dry surface. A few drops of water is ok.

  • 14,95

    CarPro Iron X advanced pH-balanced (pH-7) formula safely breaks down ferrous metallic contamination caused by automotive brakes, rail travel, and construction from delicate vehicle surfaces. It can be used on paint, plastic, chrome, glass, and alloy wheels. Iron-X works by forming a water-soluble complex with the iron particles lodged in the surface, allowing them to be rinsed free, and cleaning deeper than washing or claying alone. Available in Original, Lemon Scent, and concentrated Paste formulas for stubborn contaminants, Iron X is the original – and still the best – acid-free iron fallout remover.
    The IronX Paint and wheels Decontamination System was developed as a method of removing paint contamination beyond what can be removed by washing or claying alone! If you are familiar with detail clay, you know it is capable of removing above surface contaminants that have bonded to the paint. The IronX is designed to remove what lies below the paint surface as well as above.
    Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint’s sub-layers or paint’s pin-holes. This is a gradual process that often is not evident until it’s too late. Claying does not remove the entire particle which will continue to spread beneath the surface if not dissolved.
    During the use of your vehicle, brake dust and road grime become sintered to the surface of the car paint , rims and wheels due to the high temperature conditions they are normally exposed. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. Iron X opens up the paint’s pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint’s subsurface. Ongoing damage is immediately stopped and future damage is prevented by removing the ferrous particles.
    Iron X sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple/ red. The purple/red coloration is the Iron X Cleaner forming a bond to the sintered iron on the car paint and wheel and changing its state to a water soluble complex for easy removal. Stubborn, baked on grime may take a small amount of agitation. Rinse car paint and wheels thoroughly with a power washer and wipe dry.
    CarPro Iron X is used by body shops for pre-cleaning prior to detailing and by dealerships for new and used car prep. It is proven to deliver a clean, glassy smooth vehicle that is protected from the harmful effects of paint contamination. No other is as fast and effective at removing multi-layer paint and wheels contamination.
    FEATURES:
    Removes Iron Particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
    New Formula combines Cherry perfume to aid in masking Iron Dissolving Chemicals
    Safe to use, Acid Free, and pH neutral (pH 6-7).
    Safe to use on Clear Coat Paint
    Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.
    Safe for use on all solid car surfaces and will not deteriorate clear coats. (Avoid using on Fabric Convertible tops)
    DIRECTIONS:
    1.-Shake the bottle.
    2.-You can cover the surface with Iron X by spraying it everywhere but that can be wasteful. I recommend that you spray as needed and spread it with a small sponge or applicator to cover the entire surface. You may also consider using an atomizer type spray bottle or HVLP gun. In any case evenly cover the surfaces you wish to decontaminate. The product is strong so you don’t have to be wasteful. Just make sure it contacts the entire surface.
    3.-Allow the product to dwell for 5 minutes in the shade. Do not allow it to dry in the sun.  On light colored paints you will see the product dissolving ferrous particles as it turns color. On darker colored paints everything is happening in exactly the same way. It’s simply more difficult for you to view the color changing affect. I have read people saying the product works better on lighter colored cars but that is illogical and is not the case. It works the same regardless of car color.
    4.-After allowing to dwell take a damp (not soaked) grout or other paint safe sponge (or other media if you prefer) and agitate the surface.
    5.-Thoroughly rinse the surface.
    Don’t forget to rinse your media out also. I like to have a dedicated Iron X sponge but that isn’t necessary.
    PRECAUTIONS:
    A.-Use outside or with sufficient ventilation.
    B.-Use latex or Nitrile gloves, and face protection.
    C.-If there is an inordinate amount of tree sap, tar, other organic material, wax, or sealants on the vehicle I recommend you strip them first with TarX so Iron X can attack the ferrous particles without any interference. This is not required but is how I like to do it for best results.
    D.-For best results apply to a mostly dry surface. A few drops of water is ok.

  • 9,00

    Iron X Paste was developed to hold tight to vertical surfaces and/or attack thick deposits.  Slightly more concentrated than IX spray it contains the same unique chemical ingredients that effectively dissolve the sintered iron, by forming a water soluble iron complex. No other method cleans paint and wheels as deeply as IronX.  This puts a stop to corrosion.  Airborne fallout and ferrous (iron-containing) particles penetrate automatic paint and create corrosive compounds that eat into the paint’s sub layers.

    Detailing clay on its own removes the particles from above the surface of the paint. But it doesn’t remove the fragments that are embedded in the cars paint. This area of fallout will have a detrimental effect under the paint finish if left untreated.  The only way to truly remove ferrous particles is with a dedicated iron remover like Iron X Paste.  Iron X Paste opens up the paint’s pores to release iron particles and to neutralize the caustic compounds that have developed as a result of the particle. In one step, you can eliminate the cause and its effects.

    Put an immediate stop to paint damage before it’s too late. Iron X Paste is excellent on automotive paint and safely cleans and removes fallout from within the clear coats.  Iron X Paste is highly recommended for all clear coated, chrome, or alloy wheels. Brake dust and road grime become baked onto wheels. Brake dust contains high levels of iron and can quickly pit the surface. Iron X Paste easily removes brake dust to stop further damage. Iron X Paste can save you the cost of replacing your factory wheels!

    Features:

    Clings to vertical surfaces

    Long dwell time to work as long as needed to remove iron and brake dust spots.

    Safe to use, Acid Free, and pH neutral (pH 6-7).

    Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.

    This formulation is also effective and safe for use on all car surfaces and will not deteriorate clear coats.

    Iron X Paste prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.

    Economically priced – A little spreads a long way

     

    Directions:

    Tip: I prefer to apply with a paint safe sponge or foam applicator to a still damp surface. (As opposed to when I use Iron X spray at which point I give the vehicle a quick dry first)

    Apply to sponge and spread across surface.

    Allow the product to dwell for 5-6 minutes or as needed in the shade.  

    After allowing dwell time take a damp (not soaked) grout or other paint safe sponge (or other media if you prefer) and agitate the surface.

    Thoroughly rinse the surface or allow to dwell a bit more before rinsing thoroughly.

    Precautions:

    Do not allow to dry in direct sun

    Avoid skin contact


  • 15,95

    CarPro Reset Intensive Car Shampoo 500ml

    CarPro Reset was formulated as the perfect partner to nanotechnology based sealants and coatings, with cleaning properties tailored to their unique needs. Utilizing Intelligent pH Surfactants, Reset breaks down road grime and traffic films with the power of an alkaline cleaner, whilst being as gentle on the surface as a pH-neutral shampoo. Afterwards Reset quickly rinses free from the surface, leaving behind no soap residues or interfering silicones, restoring the beading and dirt releasing properties (The ‘Hydrophobic Effect’) of the surface to help maintain its protection. Combined with excellent lubrication, a strong foaming action for improved dirt suspension, and a high dilution ratio, this makes for a highly effective and economical wash. At the same time, Reset is almost entirely based upon naturally occurring, organic ingredients, making it as safe for the environment and for the user as it is for the vehicle. If dirt is hiding the beauty of your car or motorcycle, then you know that it is time for a Reset!


    Features & Specifications

    Developed for use with all CarPro Nanotechnology Sealants and Coatings including Reload, Hydro2, and CQuartz.* .

    No gloss enhancers, No polymers, No wax inside.

    Intelligent pH Surfactants provide a strong cleaning and foaming action, whilst remaining mild and pH-Neutral (7) in use.

    Derived almost entirely from natural, organic and biodegradable ingredients; free from the harsh sodium and lauryl sulfate derivatives found in many shampoo products.

    1:500 Dilution ratio allows for very economical cleaning.

    Excellent lubrication and fresh smelling Aqua Marine scent make for a safe, and enjoyable wash experience.

    Can be used as Snow foam shampoo as well.

    Application Instructions

    Step 1 – Fill wash bucket with 15-20 liters (Approximately 4 – 5 gallons) of water, adding 30-40 milliliters (Approximately 1-1.35 ounces) of Reset as the bucket fills to mix the shampoo solution and activate the foam. Use warm water for maximum cleaning power.

    Step 2 – Pre-rinse vehicle with free flowing water to remove loose debris, and wash out of direct sunlight from the top down using a CarPro Swirl-Free Wool Wash Mitt or Wash Sponge, rinsing the mitt/sponge periodically in a second bucket filled with clear water.

    Step 3 – Do not allow shampoo to dry on surface! After washing, rinse the vehicle thoroughly with free flowing water to remove shampoo residue, and dry with a soft Microfiber drying towel or forced-air blower.

    Step 4 – If necessary, use CarPro Spotless to remove hard water spots, and apply either Reload or Hydro2 to top-up the vehicle’s protection.

    *May degrade weak organic waxes and polymer sealants.

    Piezīme: Jutīgas ādas gadījumā lietojiet aizsargcimdus lai nepieļautu sausas ādas veidošanos vai vieglu kairinājumu. Tas attiecas uz visiem tīrīšanas līdzekļiem.


Navigation

My Cart

Close
Viewed

Recently Viewed

Close

Great to see you here !

A password will be sent to your email address.

Already got an account?

Quickview

Close

Categories